#-#-#-#-#-#-#-#-#-# INCLUDE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#-# # # # # # #-#-#-#-#-#-#-#-#-#-#-# VARIABLE DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-# # # # You can define variables that will be substituted later in the # # configuration file. This can be useful to allow settings to be # # easily changed, or to parameterize a remote includes. # # # # Variables may be redefined and may reference other variables. # # Value expansion happens at the time the tag is read. # # # # Using variable definitions REQUIRES that the config format be # # changed to "xml" from the default "compat" that uses escape # # sequences such as "\"" and "\n", and does not support # # # #-#-#-#-#-#-#-#-#-#-#-#- SERVER DESCRIPTION -#-#-#-#-#-#-#-#-#-#-#-#- # # # Here is where you enter the information about your server. # # # #-#-#-#-#-#-#-#-#-#-#-#- ADMIN INFORMATION -#-#-#-#-#-#-#-#-#-#-#-# # # # Describes the Server Administrator's real name (optionally), # # nick, and email address. # # # #-#-#-#-#-#-#-#-#-#-#-#- PORT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # # Enter the port and address bindings here. # # # # j #-#-#-#-#-#-#-#-#-#- CONNECTIONS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-# # # # This is where you can configure which connections are allowed # # and denied access onto your server. The password is optional. # # You may have as many of these as you require. To allow/deny all # # connections, use a '*' or 0.0.0.0/0. # # # # -- It is important to note that connect tags are read from the -- # # TOP DOWN. This means that you should have more specific deny # # and allow tags at the top, progressively more general, followed # # by a # # # #-#-#-#-#-#-#-#-#-#-#-#- CIDR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#- # # # CIDR configuration allows detection of clones and applying of # # throttle limits across a CIDR range. (A CIDR range is a group of # # IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be # # represented as 192.168.1.0/24). This means that abuse across an ISP # # is detected and curtailed much easier. Here is a good chart that # # shows how many IPs the different CIDRs correspond to: # # http://en.wikipedia.org/wiki/CIDR#Prefix_aggregation # # # #-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # If these values are not defined, InspIRCd uses the default DNS resolver # of your system. # # #-#-#-#-#-#-#-#-#-#-#-#-#-#-# PID FILE -#-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Define the path to the PID file here. The PID file can be used to # # rehash the ircd from the shell or to terminate the ircd from the # # shell using shell scripts, perl scripts, etc... and to monitor the # # ircd's state via cron jobs. If this is a relative path, it will be # # relative to the configuration directory, and if it is not defined, # # the default of 'inspircd.pid' is used. # # # #-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # Use these tags to customise the ban limits on a per channel basis. # # The tags are read from top to bottom, and any tag found which # # matches the channels name applies the banlimit to that channel. # # It is advisable to put an entry with the channel as '*' at the # # bottom of the list. If none are specified or no maxbans tag is # # matched, the banlist size defaults to 64 entries. # # # # #-#-#-#-#-#-#-#-#-#-#- DISABLED FEATURES -#-#-#-#-#-#-#-#-#-#-#-#-#-# # # # This tag is optional, and specifies one or more features which are # # not available to non-operators. # # # # For example you may wish to disable NICK and prevent non-opers from # # changing their nicknames. # # Note that any disabled commands take effect only after the user has # # 'registered' (e.g. after the initial USER/NICK/PASS on connection) # # so for example disabling NICK will not cripple your network. # # # # You can also define if you want to disable any channelmodes # # or usermodes from your users. # # # # `fakenonexistant' will make the ircd pretend that nonexistant # # commands simply don't exist to non-opers ("no such command"). # # # # #-#-#-#-#-#-#-#-#-#-#-#-#- SERVER OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-# # # # Settings to define which features are usable on your server. # # # # suffixpart: What (if anything) users' part message # should be suffixed with. suffixpart=""" # fixedquit: Set all users' quit messages to this value. #fixedquit="" # fixedpart: Set all users' part messages in all channels # to this value. #fixedpart="" # syntaxhints: If enabled, if a user fails to send the correct parameters # for a command, the ircd will give back some help text of what # the correct parameters are. syntaxhints="no" # cyclehosts: If enabled, when a user gets a host set, it will cycle # them in all their channels. If not, it will simply change their host # without cycling them. cyclehosts="no" # cyclehostsfromuser: If enabled, the source of the mode change for # cyclehosts will be the user who cycled. This can look nicer, but # triggers anti-takeover mechanisms of some obsolete bots. cyclehostsfromuser="no" # ircumsgprefix: Use undernet-style message prefixing for NOTICE and # PRIVMSG. If enabled, it will add users' prefix to the line, if not, # it will just message the user normally. ircumsgprefix="no" # announcets: If set to yes, when the timestamp on a channel changes, all users # in the channel will be sent a NOTICE about it. announcets="yes" # allowmismatch: Setting this option to yes will allow servers to link even # if they don't have the same "optionally common" modules loaded. Setting this to # yes may introduce some desyncs and unwanted behaviour. allowmismatch="no" # defaultbind: Sets the default for tags without an address. Choices are # ipv4 or ipv6; if not specified, IPv6 will be used if your system has support, # falling back to IPv4 otherwise. defaultbind="auto" # hostintopic: If enabled, channels will show the host of the topic setter # in the topic. If set to no, it will only show the nick of the topic setter. hostintopic="yes" # pingwarning: If a server does not respond to a ping within x seconds, # it will send a notice to opers with snomask +l informing that the server # is about to ping timeout. pingwarning="15" # serverpingfreq: How often pings are sent between servers (in seconds). serverpingfreq="60" # defaultmodes: What modes are set on a empty channel when a user # joins it and it is unregistered. defaultmodes="not" # moronbanner: This is the text that is sent to a user when they are # banned from the server. moronbanner="You're banned! Contact {{ organization['email'] }} with the ERROR line below for help." # exemptchanops: exemptions for channel access restrictions based on prefix. exemptchanops="nonick:v flood:o" # invitebypassmodes: This allows /invite to bypass other channel modes. # (Such as +k, +j, +l, etc.) invitebypassmodes="yes" # nosnoticestack: This prevents snotices from 'stacking' and giving you # the message saying '(last message repeated X times)'. Defaults to no. nosnoticestack="no" # welcomenotice: When turned on, this sends a NOTICE to connecting users # with the text Welcome to ! after successful registration. # Defaults to yes. welcomenotice="yes"> #-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-# # # #-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-# # #