Kapisi/roles/IRC/templates/anope/nickserv.conf.j2

663 lines
22 KiB
Plaintext
Raw Normal View History

/*
* Example configuration file for NickServ.
*/
/*
* First, create the service.
*/
service
{
/*
* The name of the NickServ client.
* If you change this value, you probably want to change the client directive in the configuration for the nickserv module too.
*/
nick = "NickServ"
/*
* The username of the NickServ client.
*/
user = "services"
/*
* The hostname of the NickServ client.
*/
host = "ircservices.{{ external_domain }}"
/*
* The realname of the NickServ client.
*/
gecos = "Nickname Registration Service"
/*
* The modes this client should use.
* Do not modify this unless you know what you are doing.
*
* These modes are very IRCd specific. If left commented, sane defaults
* are used based on what protocol module you have loaded.
*
* Note that setting this option incorrectly could potentially BREAK some, if
* not all, usefulness of the client. We will not support you if this client is
* unable to do certain things if this option is enabled.
*/
#modes = "+o"
/*
* An optional comma separated list of channels this service should join. Outside
* of log channels this is not very useful, as the service will just idle in the
* specified channels, and will not accept any types of commands.
*
* Prefixes may be given to the channels in the form of mode characters or prefix symbols.
*/
#channels = "@#services,#mychan"
}
/*
* Core NickServ module.
*
* Provides essential functionality for NickServ.
*/
module
{
name = "nickserv"
/*
* The name of the client that should be NickServ.
*/
client = "NickServ"
/*
* Force users to give an e-mail address when they register a nick.
*
* This directive defaults to "yes" and is recommended to be enabled. This is required if e-mail registration is enabled.
*/
forceemail = no
/*
* Require users who change their email address to confirm they
* own their new email.
*/
confirmemailchanges = no
/*
* A message sent to users on connect if they use an unregistered nick.
*
* This directive is optional.
*/
unregistered_notice = "Your nickname is not registered. If you would like it registered, contact a netadmin (identified by ^) in #lobby to get it registered."
/*
* The default options for newly registered nicks. Note that changing these options
* will have no effect on nicks which are already registered. The list must be separated
* by spaces.
*
* The options are:
* - killprotect: Kill nick if not identified within 60 seconds
* - kill_quick: Kill nick if not identified within 20 seconds, this one overrides the above
* option and the above must be specified with this one
* - ns_secure: Enable nickname security, requiring the nick's password before any operations
* can be done on it
* - ns_private: Hide the nick from NickServ's LIST command
* - hide_email: Hide's the nick's e-mail address from NickServ's INFO command
* - hide_mask: Hide's the nick's last or current user@host from NickServ's INFO command
* - hide_quit: Hide's the nick's last quit message
* - memo_signon: Notify user if they have a new memo when they sign into the nick
* - memo_receive: Notify user if they have a new memo as soon as it's received
* - memo_mail: Notify user if they have a new memo by mail
* - autoop: User will be automatically opped in channels they enter and have access to
* - msg: Services messages will be sent as PRIVMSGs instead of NOTICEs, requires
* options:useprivmsg to be enabled as well
* - ns_keepmodes: Enables keepmodes, which retains user modes across sessions
*
* This directive is optional, if left blank, the options will default to ns_secure, memo_signon, and
* memo_receive. If you really want no defaults, use "none" by itself as the option.
*/
defaults = "ns_secure ns_private hide_email hide_mask memo_signon memo_receive autoop killprotect"
/*
* The minimum length of time between consecutive uses of NickServ's REGISTER command. This
* directive is optional, but recommended. If not set, this restriction will be disabled.
*/
regdelay = 30s
/*
* The length of time before a nick's registration expires.
*
* This directive is optional, but recommended. If not set, the default is 21 days.
*/
expire = 3650d
/*
* Prevents the use of the ACCESS and CERT (excluding their LIST subcommand), DROP, FORBID, SUSPEND,
* GETPASS and SET PASSWORD commands by services operators on other services operators.
*
* This directive is optional, but recommended.
*/
secureadmins = yes
/*
* If set, Services will set the channel modes a user has access to upon identifying, assuming
* they are not already set.
*
* This directive is optional.
*/
modeonid = yes
/*
* If set, Services will set these user modes on any user who identifies.
*
* This directive is optional.
*/
#modesonid = "+R"
/*
* If set, Services will not show netsplits in the last quit message field
* of NickServ's INFO command.
*/
hidenetsplitquit = no
/*
* If set, is the length of time NickServ's killquick and kill options wait before
* forcing users off of protected nicknames.
*/
killquick = 20s
kill = 60s
/*
* If set, forbids the registration of nicks that contain an existing
* nick with Services access. For example, if Tester is a Services Oper,
* you can't register NewTester or Tester123 unless you are an IRC
* Operator.
*
* NOTE: If you enable this, you will have to be logged in as an IRC
* operator in order to register a Services Root nick when setting up
* Anope for the first time.
*
* This directive is optional.
*/
restrictopernicks = yes
/*
* The username, and possibly hostname, used for fake users created when Services needs to
* hold a nickname.
*/
enforceruser = "enforcer"
enforcerhost = "ircservices.{{ external_domain }}"
/*
* The length of time Services hold nicknames.
*
* This directive is optional, but recommended. If not set it defaults to 1 minute.
*/
releasetimeout = 1m
/*
* When a user's nick is forcibly changed to enforce a "nick kill", their new nick will start
* with this value. The rest will be made up of 6 or 7 digits.
* Make sure this is a valid nick and Nicklen+7 is not longer than the allowed Nicklen on your ircd.
*
* This directive is optional. If not set it defaults to "Guest"
*/
guestnickprefix = "Guest"
/*
* If set, Services do not allow ownership of nick names, only ownership of accounts.
*/
nonicknameownership = no
/*
* The maximum length of passwords
*
* This directive is optional. If not set it defaults to 32.
*/
passlen = 32
}
/*
* Core NickServ commands.
*
* In Anope modules can provide (multiple) commands, each of which has a unique command name. Once these modules
* are loaded you can then configure the commands to be added to any client you like with any name you like.
*
* Additionally, you may provide a permission name that must be in the opertype of users executing the command.
*
* Sane defaults are provided below that do not need to be edited unless you wish to change the default behavior.
*/
/* Command group configuration for NickServ.
*
* Commands may optionally be placed into groups to make NickServ's HELP output easier to understand.
* Remove the following groups to use the old behavior of simply listing all NickServ commands from HELP.
*/
command_group
{
name = "nickserv/admin"
description = _("Services Operator commands")
}
/* Give it a help command. */
command { service = "NickServ"; name = "HELP"; command = "generic/help"; }
/*
* ns_access
*
* Provides the command nickserv/access.
*
* Used for configuring what hosts have access to your account.
*/
module
{
name = "ns_access"
/*
* The maximum number of entries allowed on a nickname's access list.
* If not set, the default is 32. This number cannot be set to 0.
*/
accessmax = 32
/*
* If set, Services will add the usermask of registering users to the access list of their
* newly created account. If not set, users will always have to identify to NickServ before
* being recognized, unless they manually add an address to the access list of their account.
* This directive is optional.
*/
addaccessonreg = yes
}
command { service = "NickServ"; name = "ACCESS"; command = "nickserv/access"; }
/*
* ns_ajoin
*
* Provides the command nickserv/ajoin.
*
* Used for configuring channels to join once you identify.
*/
module
{
name = "ns_ajoin"
/*
* The maximum number of channels a user can have on NickServ's AJOIN command.
*/
ajoinmax = 50
}
command { service = "NickServ"; name = "AJOIN"; command = "nickserv/ajoin"; }
/*
* ns_alist
*
* Provides the command nickserv/alist.
*
* Used for viewing what channels you have access to.
*/
module { name = "ns_alist" }
command { service = "NickServ"; name = "ALIST"; command = "nickserv/alist"; }
/*
* ns_cert
*
* Provides the command nickserv/cert.
*
* Used for configuring your SSL certificate list, which can be used to automatically identify you.
*
module
{
name = "ns_cert"
/*
* The maximum number of entries allowed on a nickname's certificate fingerprint list.
* The default is 5. This number cannot be set to 0.
*
max = 5
}
command { service = "NickServ"; name = "CERT"; command = "nickserv/cert"; }
*/
/*
* ns_drop
*
* Provides the command nickserv/drop.
*
* Used for unregistering names.
*/
module { name = "ns_drop" }
command { service = "NickServ"; name = "DROP"; command = "nickserv/drop"; }
/*
* ns_getemail
*
* Provides the command nickserv/getemail.
*
* Used for getting registered accounts by searching for emails.
*/
module { name = "ns_getemail" }
command { service = "NickServ"; name = "GETEMAIL"; command = "nickserv/getemail"; permission = "nickserv/getemail"; group = "nickserv/admin"; }
/*
* ns_getpass
*
* Provides the command nickserv/getpass.
*
* Used for getting users passwords.
*
* Requires no encryption is being used.
*/
#module { name = "ns_getpass" }
#command { service = "NickServ"; name = "GETPASS"; command = "nickserv/getpass"; permission = "nickserv/getpass"; }
/*
* ns_group
*
* Provides the commands nickserv/group, nickserv/glist, and nickserv/ungroup.
*
* Used for controlling nick groups.
*/
module
{
name = "ns_group"
/*
* The maximum number of nicks allowed in a group.
*
* This directive is optional, but recommended. If not set or set to 0, no limits will be applied.
*/
maxaliases = 16
/*
* If set, the NickServ GROUP command won't allow any group changes. This is recommended to
* prevent users from accidentally dropping their nicks, as it forces users to explicitly
* drop their nicks before adding it to another group.
*
* This directive is optional, but recommended.
*/
nogroupchange = yes
}
command { service = "NickServ"; name = "GLIST"; command = "nickserv/glist"; }
command { service = "NickServ"; name = "GROUP"; command = "nickserv/group"; }
command { service = "NickServ"; name = "UNGROUP"; command = "nickserv/ungroup"; }
/*
* ns_identify
*
* Provides the command nickserv/identify.
*
* Used for identifying to accounts.
*/
module { name = "ns_identify" }
command { service = "NickServ"; name = "ID"; command = "nickserv/identify"; hide = true; }
command { service = "NickServ"; name = "IDENTIFY"; command = "nickserv/identify"; }
/*
* ns_info
*
* Provides the commands:
* nickserv/info. - Used for gathering information about an account.
* nickserv/set/hide, nickserv/saset/hide - Used for configuring which options are publically shown in nickserv/info.
*
*/
module { name = "ns_info" }
command { service = "NickServ"; name = "INFO"; command = "nickserv/info"; }
command { service = "NickServ"; name = "SET HIDE"; command = "nickserv/set/hide"; }
command { service = "NickServ"; name = "SASET HIDE"; command = "nickserv/saset/hide"; permission = "nickserv/saset/hide"; }
/*
* ns_list
*
* Provides the commands:
* nickserv/list - Used for retrieving and searching the registered account list.
* nickserv/set/private, nickserv/saset/private - Used for configuring whether or a users account shows up in nickserv/list.
*
*/
module
{
name = "ns_list"
/*
* The maximum number of nicks to be returned for a NickServ LIST command.
*/
listmax = 50
}
command { service = "NickServ"; name = "LIST"; command = "nickserv/list"; }
command { service = "NickServ"; name = "SET PRIVATE"; command = "nickserv/set/private"; }
command { service = "NickServ"; name = "SASET PRIVATE"; command = "nickserv/saset/private"; permission = "nickserv/saset/private"; }
/*
* ns_logout
*
* Provides the command nickserv/logout.
*
* Used for logging out of your account.
*/
module { name = "ns_logout" }
command { service = "NickServ"; name = "LOGOUT"; command = "nickserv/logout"; }
/*
* ns_recover
*
* Provides the command nickserv/recover.
*
* Used for recovering your nick from services or another user.
*/
module
{
name = "ns_recover"
/*
* If set, Services will svsnick and svsjoin users who use the recover
* command on an identified user to the nick and channels of the recovered user.
*
* This directive is opional.
*/
restoreonrecover = yes
}
command { service = "NickServ"; name = "RECOVER"; command = "nickserv/recover"; }
# Uncomment below to emulate 1.8's behavior of ghost and release.
#command { service = "NickServ"; name = "GHOST"; command = "nickserv/recover"; }
#command { service = "NickServ"; name = "RELEASE"; command = "nickserv/recover"; }
/*
* ns_register
*
* Provides the commands nickserv/confirm, nickserv/register, and nickserv/resend.
*
* Used for registering accounts.
*/
module
{
name = "ns_register"
/*
* Registration confirmation setting. Set to "none" for no registration confirmation,
* "mail" for email confirmation, and "admin" to have services operators manually confirm
* every registration. Set to "disable" to completely disable all registrations.
*/
registration = "none"
/*
* The minimum length of time between consecutive uses of NickServ's RESEND command.
*
* This directive is optional, but recommended. If not set, this restriction will be disabled.
*/
resenddelay = 90s
/*
* Prevents users from registering their nick if they are not connected
* for at least the given number of seconds.
*
* This directive is optional.
*/
#nickregdelay = 30s
/*
* The length of time a user using an unconfirmed account has
* before the account will be released for general use again.
*/
#unconfirmedexpire = 1d
}
#command { service = "NickServ"; name = "CONFIRM"; command = "nickserv/confirm"; }
command { service = "NickServ"; name = "REGISTER"; command = "nickserv/register"; }
#command { service = "NickServ"; name = "RESEND"; command = "nickserv/resend"; }
/*
* ns_resetpass
*
* Provides the command nickserv/resetpass.
*
* Used for resetting passwords by emailing users a temporary one.
*/
/*module { name = "ns_resetpass" }
command { service = "NickServ"; name = "RESETPASS"; command = "nickserv/resetpass"; }
*/
/*
* ns_set
*
* Provides the commands:
* nickserv/set, nickserv/saset - Dummy help wrappers for the SET and SASET commands.
* nickserv/set/autoop, nickserv/saset/autoop - Determines whether or not modes are automatically set users when joining a channel.
* nickserv/set/display, nickserv/saset/display - Used for setting a users display name.
* nickserv/set/email, nickserv/saset/email - Used for setting a users email address.
* nickserv/set/keepmodes, nickserv/saset/keepmodes - Configure whether or not services should retain a user's modes across sessions.
* nickserv/set/kill, nickserv/saset/kill - Used for configuring nickname protection.
* nickserv/set/language, nickserv/saset/language - Used for configuring what language services use.
* nickserv/set/message, nickserv/saset/message - Used to configure how services send messages to you.
* nickserv/set/password, nickserv/saset/password - Used for changing a users password.
* nickserv/set/secure, nickserv/saset/secure - Used for configuring whether a user can identify by simply being recognized by nickserv/access.
* nickserv/saset/noexpire - Used for configuring noexpire, which prevents nicks from expiring.
*/
module
{
name = "ns_set"
/*
* Allow the use of the IMMED option in the NickServ SET KILL command.
*
* This directive is optional.
*/
#allowkillimmed = yes
}
command { service = "NickServ"; name = "SET"; command = "nickserv/set"; }
command { service = "NickServ"; name = "SASET"; command = "nickserv/saset"; permission = "nickserv/saset/"; group = "nickserv/admin"; }
command { service = "NickServ"; name = "SET AUTOOP"; command = "nickserv/set/autoop"; }
command { service = "NickServ"; name = "SASET AUTOOP"; command = "nickserv/saset/autoop"; permission = "nickserv/saset/autoop"; }
command { service = "NickServ"; name = "SET DISPLAY"; command = "nickserv/set/display"; }
command { service = "NickServ"; name = "SASET DISPLAY"; command = "nickserv/saset/display"; permission = "nickserv/saset/display"; }
command { service = "NickServ"; name = "SET EMAIL"; command = "nickserv/set/email"; }
command { service = "NickServ"; name = "SASET EMAIL"; command = "nickserv/saset/email"; permission = "nickserv/saset/email"; }
command { service = "NickServ"; name = "SET KEEPMODES"; command = "nickserv/set/keepmodes"; }
command { service = "NickServ"; name = "SASET KEEPMODES"; command = "nickserv/saset/keepmodes"; permission = "nickserv/saset/keepmodes"; }
command { service = "NickServ"; name = "SET KILL"; command = "nickserv/set/kill"; }
command { service = "NickServ"; name = "SASET KILL"; command = "nickserv/saset/kill"; permission = "nickserv/saset/kill"; }
command { service = "NickServ"; name = "SET LANGUAGE"; command = "nickserv/set/language"; }
command { service = "NickServ"; name = "SASET LANGUAGE"; command = "nickserv/saset/language"; permission = "nickserv/saset/language"; }
command { service = "NickServ"; name = "SET MESSAGE"; command = "nickserv/set/message"; }
command { service = "NickServ"; name = "SASET MESSAGE"; command = "nickserv/saset/message"; permission = "nickserv/saset/message"; }
/* command { service = "NickServ"; name = "SET PASSWORD"; command = "nickserv/set/password"; }
command { service = "NickServ"; name = "SASET PASSWORD"; command = "nickserv/saset/password"; permission = "nickserv/saset/password"; }
*/
command { service = "NickServ"; name = "SET SECURE"; command = "nickserv/set/secure"; }
command { service = "NickServ"; name = "SASET SECURE"; command = "nickserv/saset/secure"; permission = "nickserv/saset/secure"; }
command { service = "NickServ"; name = "SASET NOEXPIRE"; command = "nickserv/saset/noexpire"; permission = "nickserv/saset/noexpire"; }
/*
* ns_set_misc
*
* Provides the command nickserv/set/misc.
*
* Allows you to create arbitrary commands to set data, and have that data show up in nickserv/info.
* A field named misc_description may be given for use with help output.
*/
module { name = "ns_set_misc" }
command { service = "NickServ"; name = "SET URL"; command = "nickserv/set/misc"; misc_description = _("Associate a URL with your account"); }
command { service = "NickServ"; name = "SASET URL"; command = "nickserv/saset/misc"; misc_description = _("Associate a URL with this account"); permission = "nickserv/saset/url"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET ICQ"; command = "nickserv/set/misc"; misc_description = _("Associate an ICQ account with your account"); }
#command { service = "NickServ"; name = "SASET ICQ"; command = "nickserv/saset/misc"; misc_description = _("Associate an ICQ account with this account"); permission = "nickserv/saset/icq"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET TWITTER"; command = "nickserv/set/misc"; misc_description = _("Associate a Twitter account with your account"); }
#command { service = "NickServ"; name = "SASET TWITTER"; command = "nickserv/saset/misc"; misc_description = _("Associate a Twitter account with this account"); permission = "nickserv/saset/twitter"; group = "nickserv/admin"; }
#command { service = "NickServ"; name = "SET FACEBOOK"; command = "nickserv/set/misc"; misc_description = _("Associate a Facebook URL with your account"); }
#command { service = "NickServ"; name = "SASET FACEBOOK"; command = "nickserv/saset/misc"; misc_description = _("Associate a Facebook URL with this account"); permission = "nickserv/saset/facebook"; group = "nickserv/admin"; }
/*
* ns_status
*
* Provides the nickserv/status command.
*
* Used to determine if a user is recognized or identified by services.
*/
module { name = "ns_status" }
command { service = "NickServ"; name = "STATUS"; command = "nickserv/status"; }
/*
* ns_suspend
*
* Provides the commands nickserv/suspend and nickserv/unsuspend.
*
* Used to suspend and unsuspend nicknames. Suspended nicknames can not be used but their settings are preserved.
*/
module
{
name = "ns_suspend"
/*
* The length of time before a suspended nick becomes unsuspended.
*
* This directive is optional. If not set, the default is never.
*/
#suspendexpire = 90d
/*
* Settings to show to non-opers in NickServ's INFO output.
* Comment to completely disable showing any information about
* suspended nicknames to non-opers.
*/
show = "suspended, by, reason, on, expires"
}
command { service = "NickServ"; name = "SUSPEND"; command = "nickserv/suspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }
command { service = "NickServ"; name = "UNSUSPEND"; command = "nickserv/unsuspend"; permission = "nickserv/suspend"; group = "nickserv/admin"; }
/*
* ns_update
*
* Provides the command nickserv/update.
*
* Used to update your status on all channels, turn on your vHost, etc.
*/
module { name = "ns_update" }
command { service = "NickServ"; name = "UPDATE"; command = "nickserv/update"; }
/*
* Extra NickServ related modules.
*/
/*
* ns_maxemail
*
* Limits how many times the same email address may be used in Anope
* to register accounts.
*/
#module
{
name = "ns_maxemail"
/*
* The limit to how many registered nicks can use the same e-mail address. If set to 0 or left
* commented, there will be no limit enforced when registering new accounts or using
* /msg NickServ SET EMAIL.
*/
maxemails = 1
}