1901 lines
94 KiB
Django/Jinja
1901 lines
94 KiB
Django/Jinja
#-#-#-#-#-#-#-#-#-#-#-#-#- MODULE OPTIONS -#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# These tags define which modules will be loaded on startup by your #
|
|
# server. Add modules without any paths. When you make your ircd #
|
|
# using the 'make' command, all compiled modules will be moved into #
|
|
# the folder you specified when you ran ./configure. The module tag #
|
|
# automatically looks for modules in this location. #
|
|
# If you attempt to load a module outside of this location, either #
|
|
# in the config, or via /LOADMODULE, you will receive an error. #
|
|
# #
|
|
# By default, ALL modules are commented out. You must uncomment them #
|
|
# or add lines to your config to load modules. Please refer to #
|
|
# http://wiki.inspircd.org/Modules for a list of modules and #
|
|
# each modules link for any additional conf tags they require. #
|
|
# #
|
|
# ____ _ _____ _ _ ____ _ _ _ #
|
|
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
|
|
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
|
|
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
|
|
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
|
|
# #
|
|
# To link servers to InspIRCd, you MUST load the m_spanningtree #
|
|
# module. If you don't do this, server links will NOT work at all. #
|
|
# This is by design, to allow for the implementation of other linking #
|
|
# protocols in modules in the future. This module is at the bottom of #
|
|
# this file. #
|
|
# #
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# MD5 module: Allows other modules to generate MD5 hashes, usually for
|
|
# cryptographic uses and security.
|
|
#
|
|
# IMPORTANT:
|
|
# Other modules such as m_cloaking.so and m_password_hash.so may rely on
|
|
# this module being loaded to function.
|
|
#
|
|
<module name="m_md5.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SHA256 module: Allows other modules to generate SHA256 hashes,
|
|
# usually for cryptographic uses and security.
|
|
#
|
|
# IMPORTANT:
|
|
# Other modules such as m_password_hash.so may rely on this module being
|
|
# loaded to function. Certain modules such as m_spanningtree.so will
|
|
# function without this module but when it is loaded their features will
|
|
# be enhanced (for example the addition of HMAC authentication).
|
|
#
|
|
<module name="m_sha256.so">
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# RIPEMD160 module: Allows other modules to generate RIPEMD160 hashes,
|
|
# usually for cryptographic uses and security.
|
|
#
|
|
# IMPORTANT:
|
|
# Other modules may rely on this module being loaded to function.
|
|
#<module name="m_ripemd160.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Abbreviation module: Provides the ability to abbreviate commands a-la
|
|
# BBC BASIC keywords.
|
|
<module name="m_abbreviation.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Alias module: Allows you to define server-side command aliases.
|
|
<module name="m_alias.so">
|
|
#
|
|
# Set the 'prefix' for in-channel aliases (fantasy commands) to the
|
|
# specified character. If not set, the default is "!".
|
|
# If 'allowbots' is disabled, +B clients will not be able to use
|
|
# fantasy commands. If not set, the default is no.
|
|
#<fantasy prefix="!" allowbots="no">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- ALIAS DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# If you have the m_alias.so module loaded, you may also define #
|
|
# aliases as shown below. They are commonly used to provide shortcut #
|
|
# commands to services, however they are not limited to just this use.#
|
|
# An alias tag requires the following values to be defined in it: #
|
|
# #
|
|
# text - The text to detect as the actual command line. #
|
|
# Can't contain spaces, but case insensitive. #
|
|
# You may have multiple aliases with the same #
|
|
# command name (text="" value), however the first #
|
|
# found will be executed if its format value is #
|
|
# matched, or it has no format value. Aliases are #
|
|
# read from the top of the file to the bottom. #
|
|
# #
|
|
# usercommand - If this is true, the alias can be run simply as #
|
|
# /aliasname. Defaults to true. #
|
|
# #
|
|
# channelcommand - If this is true, the alias can be used as an #
|
|
# in-channel alias or 'fantasy command', prefixed #
|
|
# by the fantasy prefix character, !aliasname by #
|
|
# default. Defaults to false. #
|
|
# #
|
|
# format - If this is defined, the parameters of the alias #
|
|
# must match this glob pattern. For example if you #
|
|
# want the first parameter to start with a # for #
|
|
# the alias to be executed, set format="#*" in the #
|
|
# alias definition. Note that the :'s which are #
|
|
# part of IRC formatted lines will be preserved #
|
|
# for matching of this text. This value is #
|
|
# optional. #
|
|
# #
|
|
# replace - The text to replace 'text' with. Usually this #
|
|
# will be "PRIVMSG ServiceName :$2-" or similar. #
|
|
# You may use the variables $1 through $9 in the #
|
|
# replace string, which refer to the first through #
|
|
# ninth word in the original string typed by the #
|
|
# user. You may also use $1- through $9- which #
|
|
# refer to the first word onwards, through to the #
|
|
# ninth word onwards, e.g. if the user types the #
|
|
# command "foo bar baz qux quz" then $3- will hold #
|
|
# "baz qux quz" and $2 will contain "bar". You may #
|
|
# also use the special variables: $nick, $ident, #
|
|
# $host and $vhost, and you may separate multiple #
|
|
# commands with a newline (which can be written in #
|
|
# the file literally, or encoded as &nl; or \n #
|
|
# depending on the config format setting). #
|
|
# #
|
|
# requires - If you provide a value for 'requires' this means #
|
|
# the given nickname MUST be online for the alias #
|
|
# to successfully trigger. If they are not, then #
|
|
# the user receives a 'no such nick' 401 numeric. #
|
|
# #
|
|
# uline - Setting this to true will ensure that the user #
|
|
# given in 'requires' is also on a u-lined server, #
|
|
# as well as actually being on the network. If the #
|
|
# user is online, but not on a u-lined server, #
|
|
# then an oper alert is sent out as this is #
|
|
# possibly a sign of a user trying to impersonate #
|
|
# a service. #
|
|
# #
|
|
# operonly - If true, this will make the alias oper only. #
|
|
# If a non-oper attempts to use the alias, it will #
|
|
# appear to not exist. #
|
|
# #
|
|
<alias text="NICKSERV" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
|
|
<alias text="CHANSERV" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
|
|
<alias text="OPERSERV" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
|
|
<alias text="BOTSERV" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
|
|
<alias text="HOSTSERV" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
|
|
<alias text="MEMOSERV" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
|
|
<alias text="NS" replace="PRIVMSG NickServ :$2-" requires="NickServ" uline="yes">
|
|
<alias text="CS" replace="PRIVMSG ChanServ :$2-" requires="ChanServ" uline="yes">
|
|
<alias text="OS" replace="PRIVMSG OperServ :$2-" requires="OperServ" uline="yes" operonly="yes">
|
|
<alias text="BS" replace="PRIVMSG BotServ :$2-" requires="BotServ" uline="yes">
|
|
<alias text="HS" replace="PRIVMSG HostServ :$2-" requires="HostServ" uline="yes">
|
|
<alias text="MS" replace="PRIVMSG MemoServ :$2-" requires="MemoServ" uline="yes">
|
|
#
|
|
# An example of using the format value to create an alias with two
|
|
# different behaviours depending on the format of the parameters.
|
|
#
|
|
#<alias text="ID" format="#*" replace="PRIVMSG ChanServ :IDENTIFY $2 $3"
|
|
# requires="ChanServ" uline="yes">
|
|
#
|
|
<alias text="ID" replace="PRIVMSG NickServ :IDENTIFY $2"
|
|
requires="NickServ" uline="yes">
|
|
#
|
|
# This alias fixes a glitch in xchat 2.6.x and above and the way it
|
|
# assumes IDENTIFY must be prefixed by a colon (:) character. It should
|
|
# be placed ABOVE the default NICKSERV alias (the first example) listed
|
|
# above.
|
|
#
|
|
<alias text="NICKSERV" format=":IDENTIFY *" replace="PRIVMSG NickServ :IDENTIFY $3-"
|
|
requires="NickServ" uline="yes">
|
|
#
|
|
# You may also add aliases to trigger based on something said in a
|
|
# channel, aka 'fantasy' commands, configured in the same manner as any
|
|
# other alias, with usercommand="no" and channelcommand="yes" The
|
|
# command must be preceded by the fantasy prefix when used.
|
|
#
|
|
#<alias text="CS" usercommand="no" channelcommand="yes"
|
|
# replace="PRIVMSG ChanServ :$1 $chan $2-" requires="ChanServ" uline="yes">
|
|
#
|
|
# This would be used as "!cs <command> <options>", with the channel
|
|
# being automatically inserted after the command in the message to
|
|
# ChanServ, assuming the fantasy prefix is "!".
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Allowinvite module: Gives channel mode +A to allow all users to use
|
|
# /INVITE, and extban A to deny invite from specific masks.
|
|
<module name="m_allowinvite.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Alltime module: Shows time on all connected servers at once.
|
|
# This module is oper-only and provides /ALLTIME.
|
|
# To use, ALLTIME must be in one of your oper class blocks.
|
|
#<module name="m_alltime.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Auditorium module: Adds channel mode +u which makes everyone else
|
|
# except you in the channel invisible, used for large meetings etc.
|
|
<module name="m_auditorium.so">
|
|
#
|
|
# Auditorium settings:
|
|
#
|
|
<auditorium opvisible="no" opcansee="no" opercansee="yes">
|
|
#
|
|
# opvisible (auditorium-vis in exemptchanops):
|
|
# Show channel ops to all users
|
|
# opcansee (auditorium-see in exemptchanops):
|
|
# Allow ops to see all joins/parts/kicks in the channel
|
|
# opercansee:
|
|
# Allow opers (channels/auspex) to see see all joins/parts/kicks in the channel
|
|
#
|
|
# Exemptchanops can be used to adjust the level at which users become visible or
|
|
# the level at which they can see the full member list of the channel.
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Autoop module: Adds basic channel access controls via the +w listmode.
|
|
# For example +w o:*!Attila@127.0.0.1 will op anyone matching that mask
|
|
# on join. This can be combined with extbans, for example +w o:R:Brain
|
|
# will op anyone identified to the account "Brain".
|
|
# Another useful combination is with SSL client certificate
|
|
# fingerprints: +w h:z:72db600734bb9546c1bdd02377bc21d2a9690d48 will
|
|
# give halfop to the user(s) having the given certificate.
|
|
#<module name="m_autoop.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Ban except module: Adds support for channel ban exceptions (+e).
|
|
#<module name="m_banexception.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Ban redirection module: Allows bans which redirect to a specified
|
|
# channel. e.g. +b nick!ident@host#channelbanneduserissentto
|
|
#<module name="m_banredirect.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Block amsg module: Attempt to block all usage of /amsg and /ame.
|
|
#<module name="m_blockamsg.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- BLOCKAMSG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# If you have the m_blockamsg.so module loaded, you can configure it #
|
|
# with the <blockamsg> tag: #
|
|
# #
|
|
# delay - How many seconds between two messages to force #
|
|
# them to be recognised as unrelated. #
|
|
# action - Any of 'notice', 'noticeopers', 'silent', 'kill' #
|
|
# or 'killopers'. Define how to take action when #
|
|
# a user uses /amsg or /ame. #
|
|
#
|
|
#<blockamsg delay="3" action="killopers">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Block CAPS module: Adds channel mode +B, blocks all-CAPS messages.
|
|
#<module name="m_blockcaps.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- BLOCKCAPS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# percent - How many percent of text must be caps before text #
|
|
# will be blocked. #
|
|
# #
|
|
# minlen - The minimum length a line must be for the block #
|
|
# percent to have any effect. #
|
|
# #
|
|
# capsmap - A list of chars to be considered CAPS. Can be used #
|
|
# to add CAPS characters for your language. Also you #
|
|
# can add things like ! and space to further lock #
|
|
# down on caps usage. #
|
|
#<blockcaps percent="50"
|
|
# minlen="5"
|
|
# capsmap="ABCDEFGHIJKLMNOPQRSTUVWXYZ! ">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Block color module: Blocking color-coded messages with chan mode +c.
|
|
#<module name="m_blockcolor.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Botmode module: Adds the user mode +B. If set on a user, it will
|
|
# show that the user is a bot in /WHOIS.
|
|
<module name="m_botmode.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# CallerID module: Adds usermode +g which activates hybrid-style
|
|
# callerid: block all private messages unless you /ACCEPT first.
|
|
#<module name="m_callerid.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- CALLERID CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
|
|
# maxaccepts - Maximum number of entries a user can add to his #
|
|
# /ACCEPT list. Default is 16 entries. #
|
|
# operoverride - Can opers (note: ALL opers) override callerid? #
|
|
# Default is no. #
|
|
# tracknick - Preserve /accept entries when a user changes nick? #
|
|
# If no (the default), the user is removed from #
|
|
# everyone's accept list if he changes nickname. #
|
|
# cooldown - Amount of time (in seconds) that must pass since #
|
|
# the last notification sent to a user before he can #
|
|
# be sent another. Default is 60 (1 minute). #
|
|
#<callerid maxaccepts="16"
|
|
# operoverride="no"
|
|
# tracknick="no"
|
|
# cooldown="60">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# CAP module: Provides the CAP negotiation mechanism required by the
|
|
# m_sasl, m_namesx, m_uhnames, and m_ircv3 modules.
|
|
# It is also recommended for the STARTTLS support in m_ssl_gnutls.
|
|
<module name="m_cap.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# CBAN module: Lets you disallow channels from being used at runtime.
|
|
# This module is oper-only and provides /CBAN.
|
|
# To use, CBAN must be in one of your oper class blocks.
|
|
#<module name="m_cban.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Censor module: Adds channel and user mode +G.
|
|
#<module name="m_censor.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- CENSOR CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# Optional - If you specify to use the m_censor module, then you must #
|
|
# specify some censor tags. See also: #
|
|
# http://wiki.inspircd.org/Modules/censor #
|
|
#
|
|
#<include file="conf/examples/censor.conf.example">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# CGI:IRC module: Adds support for automatic host changing in CGI:IRC
|
|
# (http://cgiirc.sourceforge.net).
|
|
<module name="m_cgiirc.so">
|
|
<cgihost type="webirc" password="{{ secrets['IRC']['webirc'] }}" mask="127.0.0.1">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-# CGIIRC CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#-#
|
|
#
|
|
# Optional - If you specify to use m_cgiirc, then you must specify one
|
|
# or more cgihost tags which indicate authorised CGI:IRC servers which
|
|
# will be connecting to your network, and an optional cgiirc tag.
|
|
# For more information see: http://wiki.inspircd.org/Modules/cgiirc
|
|
#
|
|
# Set to yes if you want to notice opers when CGI:IRC clients connect.
|
|
# <cgiirc opernotice="no">
|
|
#
|
|
# The type field indicates where the module should get the real
|
|
# client's IP address from, for further information, please see the
|
|
# CGI:IRC documentation.
|
|
#
|
|
# Old style:
|
|
# <cgihost type="pass" mask="www.example.com"> # Get IP from PASS
|
|
# <cgihost type="ident" mask="otherbox.example.com"> # Get IP from ident
|
|
# <cgihost type="passfirst" mask="www.example.com"> # See the docs
|
|
# New style:
|
|
# <cgihost type="webirc" password="foobar"
|
|
# mask="somebox.example.com"> # Get IP from WEBIRC
|
|
#
|
|
# IMPORTANT NOTE:
|
|
# ---------------
|
|
#
|
|
# When you connect CGI:IRC clients, there are two connect classes which
|
|
# apply to these clients. When the client initially connects, the connect
|
|
# class which matches the CGI:IRC site's host is checked. Therefore you
|
|
# must raise the maximum local/global clients for this ip as high as you
|
|
# want to allow cgi clients. After the client has connected and is
|
|
# determined to be a cgi:irc client, the class which matches the client's
|
|
# real IP is then checked. You may set this class to a lower value, so that
|
|
# the real IP of the client can still be restricted to, for example, 3
|
|
# sessions maximum.
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Channel create module: Adds snomask +j, which will notify opers of
|
|
# any new channels that are created.
|
|
# This module is oper-only.
|
|
<module name="m_chancreate.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Channel filter module: Allows channel-op defined message filtering
|
|
# using simple string matches (channel mode +g).
|
|
#<module name="m_chanfilter.so">
|
|
#
|
|
# If hidemask is set to yes, the user will not be shown the mask when
|
|
# his/her message is blocked.
|
|
#<chanfilter hidemask="yes">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Channel history module: Displays the last 'X' lines of chat to a user
|
|
# joining a channel with +H 'X:T' set; 'T' is the maximum time to keep
|
|
# lines in the history buffer. Designed so that the new user knows what
|
|
# the current topic of conversation is when joining the channel.
|
|
#<module name="m_chanhistory.so">
|
|
#
|
|
# Set the maximum number of lines allowed to be stored per channel below.
|
|
# This is the hard limit for 'X'.
|
|
# If notice is set to yes, joining users will get a NOTICE before playback
|
|
# telling them about the following lines being the pre-join history.
|
|
#<chanhistory maxlines="20" notice="yes">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Channel logging module: Used to send snotice output to channels, to
|
|
# allow staff to centrally monitor and discuss network activity.
|
|
#
|
|
# The "channel" field is where you want the messages to go, "snomasks"
|
|
# is what snomasks you want to be sent to that channel. Multiple tags
|
|
# are allowed.
|
|
<module name="m_chanlog.so">
|
|
<chanlog snomasks="AOcC" channel="#private">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Channel names module: Allows disabling channels which have certain
|
|
# characters in the channel name such as bold, colorcodes, etc. which
|
|
# can be quite annoying and allow users to on occasion have a channel
|
|
# that looks like the name of another channel on the network.
|
|
#<module name="m_channames.so">
|
|
|
|
#<channames
|
|
# denyrange: characters or range of characters to deny in channel
|
|
# names.
|
|
#denyrange="2,3"
|
|
|
|
# allowrange: characters or range of characters to specifically allow
|
|
# in channel names.
|
|
#allowrange="">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Channelban: Implements extended ban j:, which stops anyone already
|
|
# in a channel matching a ban like +b j:#channel*mask from joining.
|
|
# Note that by default wildcard characters * and ? are allowed in
|
|
# channel names. To disallow them, load m_channames and add characters
|
|
# 42 and 63 to denyrange (see above).
|
|
#<module name="m_channelban.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Custom prefixes: Allows for channel prefixes to be configured.
|
|
<module name="customprefix">
|
|
#
|
|
# name The name of the mode, must be unique from other modes.
|
|
# letter The letter used for this mode. Required.
|
|
# prefix The prefix used for nicks with this mode. Not required.
|
|
# rank A numeric rank for this prefix, defining what permissions it gives.
|
|
# The rank of voice, halfop and op is 10000, 20000, and 30000,
|
|
# respectively.
|
|
# ranktoset The numeric rank required to set this mode. Defaults to rank.
|
|
# ranktounset The numeric rank required to unset this mode. Defaults to ranktoset.
|
|
# depriv Can you remove the mode from yourself? Defaults to yes.
|
|
<customprefix name="founder" letter="q" prefix="~" rank="50000" ranktoset="50000">
|
|
<customprefix name="admin" letter="a" prefix="&" rank="40000" ranktoset="50000">
|
|
<customprefix name="halfop" letter="h" prefix="%" rank="20000" ranktoset="30000">
|
|
#
|
|
# You can also override the configuration of prefix modes added by both the core
|
|
# and other modules by adding a customprefix tag with change="yes" specified.
|
|
# <customprefix name="op" change="yes" rank="30000" ranktoset="30000">
|
|
# <customprefix name="voice" change="yes" rank="10000" ranktoset="20000" depriv="no">
|
|
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Check module: Adds the /CHECK command.
|
|
# Check is useful for looking up information on channels, users,
|
|
# IP addresses and hosts.
|
|
# This module is oper-only.
|
|
# To use, CHECK must be in one of your oper class blocks.
|
|
<module name="m_check.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# CHGHOST module: Adds the /CHGHOST command.
|
|
# This module is oper-only.
|
|
# To use, CHGHOST must be in one of your oper class blocks.
|
|
# NOTE: Services will not be able to set vhosts on users if this module
|
|
# isn't loaded. If you're planning on running services, you probably
|
|
# want to load this.
|
|
<module name="m_chghost.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-# /CHGHOST - /SETHOST CONFIGURATION #-#-#-#-#-#-#-#-#
|
|
# Optional - If you want to use special chars for hostnames you can #
|
|
# specify your own custom list of chars with the <hostname> tag: #
|
|
# #
|
|
# charmap - A list of chars accepted as valid by the /CHGHOST #
|
|
# and /SETHOST commands. Also note that the list is #
|
|
# case-sensitive. #
|
|
<hostname charmap="abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ.-_/0123456789">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# CHGIDENT module: Adds the /CHGIDENT command.
|
|
# This module is oper-only.
|
|
# To use, CHGIDENT must be in one of your oper class blocks.
|
|
<module name="m_chgident.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# CHGNAME module: Adds the /CHGNAME command.
|
|
# This module is oper-only.
|
|
# To use, CHGNAME must be in one of your oper class blocks.
|
|
<module name="m_chgname.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Cloaking module: Adds usermode +x and cloaking support.
|
|
# Relies on the module m_md5.so being loaded.
|
|
# To cloak users when they connect, load m_conn_umodes and set
|
|
# <connect:modes> to include the +x mode. The example <connect> tag
|
|
# shows this. See the m_conn_umodes module for more information.
|
|
<module name="m_cloaking.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- CLOAKING CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# To use m_cloaking, you must define a cloak key, and optionally a #
|
|
# cloak prefix as shown below. The cloak key must be shared across #
|
|
# the network for correct cloaking. #
|
|
# #
|
|
# There are four methods of cloaking: #
|
|
# #
|
|
# half Cloak only the "unique" portion of a host; show #
|
|
# the last 2 parts of the domain, /16 subnet of IPv4 #
|
|
# or /48 subnet of the IPv6 address. #
|
|
# #
|
|
# full Cloak the users completely, using three slices for #
|
|
# common CIDR bans (IPv4: /16, /24; IPv6: /48, /64). #
|
|
# #
|
|
# These methods use a single key that can be any length of text. #
|
|
# An optional prefix may be specified to mark cloaked hosts. #
|
|
# #
|
|
# The following methods are maintained for backwards compatibility; #
|
|
# they are slightly less secure, and always hide unresolved IPs. #
|
|
# #
|
|
# compat-host InspIRCd 1.2-compatible host-based cloaking. #
|
|
# compat-ip InspIRCd 1.2-compatible ip-always cloaking. #
|
|
# #
|
|
# If you use a compat cloaking mode then you must specify key1, key2, #
|
|
# key3, key4; the values must be less than 0x80000000 and should be #
|
|
# picked at random. Prefix is mandatory, will default to network name #
|
|
# if not specified, and will always have a "-" appended. #
|
|
#
|
|
<cloak mode="half"
|
|
key="{{ secrets['IRC']['cloakpass'] }}"
|
|
prefix="aninix-">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#- CLOSE MODULE #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Close module: Allows an oper to close all unregistered connections.
|
|
# This module is oper-only and provides the /CLOSE command.
|
|
# To use, CLOSE must be in one of your oper class blocks.
|
|
# <module name="m_close.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Clones module: Adds an oper command /CLONES for detecting cloned
|
|
# users. Warning: This command may be resource intensive when it is
|
|
# issued, use with care.
|
|
# This module is oper-only.
|
|
# To use, CLONES must be in one of your oper class blocks.
|
|
#<module name="m_clones.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Common channels module: Adds user mode +c, which, when set, requires
|
|
# that users must share a common channel with you to PRIVMSG or NOTICE
|
|
# you.
|
|
#<module name="m_commonchans.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Auto join on connect module: Allows you to force users to join one
|
|
# or more channels automatically upon connecting to the server.
|
|
<module name="m_conn_join.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-#- CONNJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
#
|
|
# If you have m_conn_join.so loaded, you can configure it using the
|
|
# following values, or set autojoin="#chat,#help" in <connect> blocks.
|
|
#
|
|
<autojoin channel="#lobby">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Set modes on connect module: When this module is loaded <connect>
|
|
# blocks may have an optional modes="" value, which contains modes to
|
|
# add or remove from users when they connect to the server.
|
|
<module name="m_conn_umodes.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Wait for PONG on connect module: Send a PING to all connecting users
|
|
# and don't let them connect until they reply with a PONG.
|
|
# This is useful to stop certain kinds of bots and proxies.
|
|
<module name="m_conn_waitpong.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- WAITPONG CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# If you have the m_conn_waitpong.so module loaded, configure it with #
|
|
# the <waitpong> tag: #
|
|
# #
|
|
# sendsnotice - Whether to send a helpful notice to users on #
|
|
# connect telling them how to connect, should #
|
|
# their client not reply PONG automatically. #
|
|
# #
|
|
# killonbadreply - Whether to kill the user if they send the wrong #
|
|
# PONG reply. #
|
|
# #
|
|
<waitpong sendsnotice="yes" killonbadreply="yes">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Channel cycle module: Adds the /CYCLE command which is a server-side
|
|
# /HOP that bypasses restrictive modes.
|
|
#<module name="m_cycle.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Connectban: Provides IP connection throttling. Any IP range that
|
|
# connects too many times (configurable) in an hour is Z-Lined for a
|
|
# (configurable) duration, and their count resets to 0.
|
|
#<module name="m_connectban.so">
|
|
#
|
|
# ipv4cidr and ipv6cidr allow you to turn the comparison from
|
|
# individual IP addresses (32 and 128 bits) into CIDR masks, to allow
|
|
# for throttling over whole ISPs/blocks of IPs, which may be needed to
|
|
# prevent attacks.
|
|
#
|
|
# This allows for 10 connections in an hour with a 10 minute ban if
|
|
# that is exceeded.
|
|
#<connectban threshold="10" duration="10m" ipv4cidr="32" ipv6cidr="128">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Connection throttle module.
|
|
<module name="m_connflood.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- CONNTHROTTLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
|
|
# seconds, maxconns - Amount of connections per <seconds>.
|
|
#
|
|
# timeout - Time to wait after the throttle was activated
|
|
# before deactivating it. Be aware that the time
|
|
# is seconds + timeout.
|
|
#
|
|
# quitmsg - The message that users get if they attempt to
|
|
# connect while the throttle is active.
|
|
#
|
|
# bootwait - Amount of time in seconds to wait before enforcing
|
|
# the throttling when the server just booted.
|
|
#
|
|
<connflood seconds="15" maxconns="5" timeout="30"
|
|
quitmsg="Throttled" bootwait="10">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Custom prefixes: Allows for channel prefixes to be added.
|
|
# This replaces m_chanprotect and m_halfop.
|
|
#<module name="m_customprefix.so">
|
|
#
|
|
# name The name of the mode, must be unique from other modes.
|
|
# letter The letter used for this mode. Required.
|
|
# prefix The prefix used for nicks with this mode. Not required.
|
|
# rank A numeric rank for this prefix, defining what permissions it gives.
|
|
# The rank of voice, halfop and op is 10000, 20000, and 30000,
|
|
# respectively.
|
|
# ranktoset The numeric rank required to set/unset this mode. Defaults to rank.
|
|
# depriv Can you remove the mode from yourself? Defaults to yes.
|
|
#<customprefix name="founder" letter="q" prefix="~" rank="50000" ranktoset="50000">
|
|
#<customprefix name="admin" letter="a" prefix="&" rank="40000" ranktoset="50000">
|
|
#<customprefix name="halfop" letter="h" prefix="%" rank="20000" ranktoset="30000">
|
|
#<customprefix name="halfvoice" letter="V" prefix="-" rank="1" ranktoset="20000">
|
|
#
|
|
# Do /RELOADMODULE m_customprefix.so after changing the settings of this module.
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Custom title module: Adds the /TITLE command which allows for trusted
|
|
# users to gain a custom whois line and an optional vhost can be
|
|
# specified.
|
|
#<module name="m_customtitle.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#- CUSTOM TITLE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
|
|
# name - The username used to identify.
|
|
# password - The password used to identify.
|
|
# hash - The hash for the specific user's password (optional).
|
|
# m_password_hash.so and a hashing module must be loaded
|
|
# for this to work.
|
|
# host - Allowed hostmask (optional).
|
|
# title - Title shown in whois.
|
|
# vhost - Displayed host (optional).
|
|
#
|
|
#<title name="foo" password="bar" title="Official Chat Helper">
|
|
#<title name="bar" password="foo" host="ident@test.org" title="Official Chat Helper" vhost="helper.test.org">
|
|
#<title name="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" title="Official Chat Helper">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# DCCALLOW module: Adds the /DCCALLOW command.
|
|
#<module name="m_dccallow.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- DCCALLOW CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
# blockchat - Whether to block DCC CHAT as well as DCC SEND.
|
|
# length - Default duration of entries in DCCALLOW list.
|
|
# action - Default action to take if no action is
|
|
# specified, can be 'block' or 'allow'.
|
|
# maxentries - Max number of nicks to allow on a DCCALLOW list.
|
|
#
|
|
# File configuration:
|
|
# pattern - The glob pattern to match against.
|
|
# action - Action to take if a user attempts to send a file
|
|
# that matches this pattern, can be 'block' or
|
|
# 'allow'.
|
|
#
|
|
#<dccallow blockchat="yes" length="5m" action="block" maxentries="20">
|
|
#<banfile pattern="*.exe" action="block">
|
|
#<banfile pattern="*.txt" action="allow">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Deaf module: Adds support for the usermode +d - deaf to channel
|
|
# messages and channel notices.
|
|
#<module name="m_deaf.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Delay join module: Adds the channel mode +D which delays all JOIN
|
|
# messages from users until they speak. If they quit or part before
|
|
# speaking, their quit or part message will not be shown to the channel
|
|
# which helps cut down noise on large channels in a more friendly way
|
|
# than the auditorium mode. Only channel ops may set the +D mode.
|
|
#<module name="m_delayjoin.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Delay message module: Adds the channel mode +d which disallows a user
|
|
# from talking in the channel unless they've been joined for X seconds.
|
|
# Settable using /MODE #chan +d 30
|
|
#<module name="m_delaymsg.so">
|
|
# Set allownotice to no to disallow NOTICEs too. Defaults to yes.
|
|
#<delaymsg allownotice="no">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Deny channels module: Deny channels from being used by users.
|
|
<module name="m_denychans.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- DENYCHAN DEFINITIONS -#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# If you have the m_denychans.so module loaded, you need to specify #
|
|
# the channels to deny: #
|
|
# #
|
|
# name - The channel name to deny (glob masks are ok). #
|
|
# allowopers - If operators are allowed to override the deny. #
|
|
# reason - Reason given for the deny. #
|
|
# redirect - Redirect the user to a different channel. #
|
|
# #
|
|
<badchan name="#private*" redirect="#lobby" allowopers="yes" reason="Bots and opers only"> #
|
|
#<badchan name="#chan1" redirect="#chan2" reason="Chan1 is closed"> #
|
|
# #
|
|
# Redirects will not work if the target channel is set +L. #
|
|
# #
|
|
# Additionally, you may specify channels which are allowed, even if #
|
|
# a badchan tag specifies it would be denied: #
|
|
#<goodchan name="#funtimes"> #
|
|
# Glob masks are accepted here also. #
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Devoice module: Let users devoice themselves using /DEVOICE #chan.
|
|
#<module name="m_devoice.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# DNS blacklist module: Provides support for looking up IPs on one or #
|
|
# more blacklists. #
|
|
#<module name="m_dnsbl.so"> #
|
|
# #
|
|
# For configuration options please see the wiki page for m_dnsbl at #
|
|
# http://wiki.inspircd.org/Modules/dnsbl #
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Exempt channel operators module: Provides support for allowing #
|
|
# channel operators to be exempt from some channel modes. Supported #
|
|
# modes are blockcaps, noctcp, blockcolor, nickflood, flood, censor, #
|
|
# filter, regmoderated, nonick, nonotice, and stripcolor. #
|
|
#<module name="m_exemptchanops.so"> #
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Filter module: Provides message filtering, similar to SPAMFILTER. #
|
|
#<module name="m_filter.so">
|
|
# #
|
|
# This module depends upon a regex provider such as m_regex_pcre or #
|
|
# m_regex_glob to function. You must specify which of these you want #
|
|
# m_filter to use via the tag below. #
|
|
# #
|
|
# Valid engines are: #
|
|
# #
|
|
# glob - Glob patterns, provided via m_regex_glob. #
|
|
# pcre - PCRE regexps, provided via m_regex_pcre, needs libpcre. #
|
|
# tre - TRE regexps, provided via m_regex_tre, requires libtre. #
|
|
# posix - POSIX regexps, provided via m_regex_posix, not available #
|
|
# on Windows, no dependencies on other operating systems. #
|
|
# stdlib - stdlib regexps, provided via m_regex_stdlib, see comment #
|
|
# at the <module> tag for info on availability. #
|
|
# #
|
|
#<filteropts engine="glob"> #
|
|
# #
|
|
# Your choice of regex engine must match on all servers network-wide.
|
|
#
|
|
# You may specify specific channels that are exempt from being filtered:
|
|
#<exemptfromfilter channel="#blah">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- FILTER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# Optional - If you specify to use the m_filter module, then #
|
|
# specify below the path to the filter.conf file, or define some #
|
|
# <filter> tags. #
|
|
# #
|
|
#<include file="conf/examples/filter.conf.example">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Gecos ban: Implements extended ban 'r', which stops anyone matching
|
|
# a mask like +b r:*realname?here* from joining a channel.
|
|
#<module name="m_gecosban.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# GeoIP module: Allows the server admin to match users by country code.
|
|
# This module is in extras. Re-run configure with:
|
|
# ./configure --enable-extras=m_geoip.cpp
|
|
# and run make install, then uncomment this module to enable it.
|
|
# This module requires GeoIP to be installed on your system,
|
|
# use your package manager to find the appropriate packages
|
|
# or check the InspIRCd wiki page for this module.
|
|
#<module name="m_geoip.so">
|
|
#
|
|
# The actual allow/ban actions are done by connect classes, not by the
|
|
# GeoIP module. An example connect class to ban people from russia or
|
|
# turkey:
|
|
#
|
|
# <connect deny="*" geoip="TR,RU">
|
|
#
|
|
# The country code must be in capitals and should be an ISO country
|
|
# code such as TR, GB, or US. Unknown IPs (localhost, LAN IPs, etc)
|
|
# will be assigned the country code "UNK". Since connect classes are
|
|
# matched from top down, your deny classes must be above your allow
|
|
# classes for them to match.
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Globops module: Provides the /GLOBOPS command and snomask +g.
|
|
# This module is oper-only.
|
|
# To use, GLOBOPS must be in one of your oper class blocks.
|
|
<module name="m_globops.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Global load module: Allows loading and unloading of modules network-
|
|
# wide (USE WITH EXTREME CAUTION!)
|
|
# This module is oper-only and provides /GLOADMODULE, /GUNLOADMODULE
|
|
# and /GRELOADMODULE.
|
|
# To use, GLOADMODULE, GUNLOADMODULE and GRELOADMODULE
|
|
# must be in one of your oper class blocks.
|
|
#<module name="m_globalload.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Halfop module: Provides the +h (halfops) channel status mode.
|
|
#<module name="m_halfop.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# HELPOP module: Provides the /HELPOP command.
|
|
#<module name="m_helpop.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-#- HELPOP CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# If you specify to use the m_helpop.so module, then specify below #
|
|
# the path to the helpop.conf file. #
|
|
#<include file="conf/examples/inspircd.helpop-full.example">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Hide chans module: Allows users to hide their channels list from non-
|
|
# opers by setting user mode +I on themselves.
|
|
<module name="m_hidechans.so">
|
|
#
|
|
# This mode can optionally prevent opers from seeing channels on a +I
|
|
# user, for more privacy if set to true.
|
|
# This setting is not recommended for most mainstream networks.
|
|
#<hidechans affectsopers="false">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Hide oper module: Allows opers to hide their oper status from non-
|
|
# opers by setting user mode +H on themselves.
|
|
# This module is oper-only.
|
|
#<module name="m_hideoper.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Hostchange module: Allows a different style of cloaking.
|
|
#<module name="m_hostchange.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- HOSTCHANGE CONFIGURATION -#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# See http://wiki.inspircd.org/Modules/hostchange for help. #
|
|
# #
|
|
#<host suffix="invalid.org" separator="." prefix="">
|
|
#<hostchange mask="*@42.theanswer.example.org" action="addnick">
|
|
#<hostchange mask="*root@*" action="suffix">
|
|
#<hostchange mask="a@example.com" action="set" value="foo.bar.baz">
|
|
#<hostchange mask="localhost" ports="7000,7001,7005-7007" action="set" value="blahblah.foo">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# httpd module: Provides HTTP server support for InspIRCd.
|
|
#<module name="m_httpd.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
#
|
|
# If you choose to use the m_httpd.so module, then you will need to add
|
|
# a <bind> tag with type "httpd", and load at least one of the other
|
|
# m_httpd_* modules to provide pages to display.
|
|
#
|
|
# You can adjust the timeout for HTTP connections below. All HTTP
|
|
# connections will be closed after (roughly) this many seconds.
|
|
#<httpd timeout="20">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# HTTP ACL module: Provides access control lists for m_httpd dependent
|
|
# modules. Use this module to restrict pages by IP address and by
|
|
# password.
|
|
#<module name="m_httpd_acl.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-#- HTTPD ACL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
#
|
|
# Restrict access to the m_httpd_stats module to all but the local
|
|
# network and when the correct password is specified:
|
|
# <httpdacl path="/stats*" types="password,whitelist"
|
|
# username="secrets" password="mypasshere" whitelist="127.0.0.*,10.*">
|
|
#
|
|
# Deny all connections to all but the main index page:
|
|
# <httpdacl path="/*" types="blacklist" blacklist="*">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# HTTP config module: Allows the configuration of the server to be
|
|
# viewed over HTTP. Requires m_httpd.so to be loaded for it to function.
|
|
#<module name="m_httpd_config.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# HTTP stats module: Provides basic stats pages over HTTP.
|
|
# Requires m_httpd.so to be loaded for it to function.
|
|
#<module name="m_httpd_stats.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Ident: Provides RFC 1413 ident lookup support.
|
|
# When this module is loaded <connect:allow> tags may have an optional
|
|
# useident="yes|no" boolean value, determining whether or not to lookup
|
|
# ident on users matching that connect tag.
|
|
<module name="m_ident.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-#- IDENT CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# Optional - If you are using the m_ident.so module, then you can #
|
|
# specify the timeout for ident lookups here. If not defined, it will #
|
|
# default to 5 seconds. This is a non-blocking timeout which holds #
|
|
# the user in a 'connecting' state until the lookup is complete. #
|
|
# The bind value indicates which IP to bind outbound requests to. #
|
|
#
|
|
<ident timeout="20">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Invite exception module: Adds support for channel invite exceptions
|
|
# (+I).
|
|
#<module name="m_inviteexception.so">
|
|
# bypasskey: If this is enabled, exceptions will bypass +k as well as +i
|
|
#<inviteexception bypasskey="yes">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# IRCv3 module: Provides the following IRCv3.1 extensions:
|
|
# extended-join, away-notify and account-notify. These are optional
|
|
# enhancements to the client-to-server protocol. An extension is only
|
|
# active for a client when the client specifically requests it, so this
|
|
# module needs m_cap to work.
|
|
#
|
|
# Further information on these extensions can be found at the IRCv3
|
|
# working group website:
|
|
# http://ircv3.org/extensions/
|
|
#
|
|
#<module name="m_ircv3.so">
|
|
# The following block can be used to control which extensions are
|
|
# enabled. Note that extended-join can be incompatible with m_delayjoin
|
|
# and host cycling.
|
|
<ircv3 accountnotify="on" awaynotify="on" extendedjoin="on">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Join flood module: Adds support for join flood protection +j X:Y.
|
|
# Closes the channel for 60 seconds if X users join in Y seconds.
|
|
#<module name="m_joinflood.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Jump server module: Adds support for the RPL_REDIR numeric.
|
|
# This module is oper-only.
|
|
# To use, JUMPSERVER must be in one of your oper class blocks.
|
|
# If your server is redirecting new clients and you get disconnected,
|
|
# do a REHASH from shell to open up again.
|
|
#<module name="m_jumpserver.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Anti auto rejoin: Adds support for prevention of auto-rejoin (+J).
|
|
#<module name="m_kicknorejoin.so">
|
|
# Set the maximum time that is accepted as a parameter for +J here.
|
|
#<kicknorejoin maxtime="1m">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Knock module: Adds the /KNOCK command and channel mode +K.
|
|
<module name="m_knock.so">
|
|
#
|
|
# This setting specifies what to do when someone successfully /KNOCKs.
|
|
# If set to "notice", then a NOTICE will be sent to the channel.
|
|
# This is the default and the compatible setting, as it requires no
|
|
# special support from the clients.
|
|
# If set to "numeric" then a 710 numeric will be sent to the channel.
|
|
# This allows easier scripting but not all clients support it.
|
|
# If set to "both" then (surprise!) both will be sent.
|
|
<knock notify="notice">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# LDAP authentication module: Adds the ability to authenticate users #
|
|
# via LDAP. This is an extra module which must be enabled explicitly #
|
|
# by symlinking it from modules/extra, and requires the OpenLDAP libs #
|
|
# This module is in extras. To enable it, Re-run configure with: #
|
|
# ./configure --enable-extras=m_ldapauth.cpp #
|
|
# and run make install, then uncomment this module. #
|
|
#<module name="m_ldapauth.so">
|
|
# #
|
|
# Configuration: #
|
|
# #
|
|
# <ldapauth baserdn="ou=People,dc=brainbox,dc=cc" #
|
|
# attribute="uid" #
|
|
# server="ldap://brainwave.brainbox.cc" #
|
|
# allowpattern="Guest*" #
|
|
# killreason="Access denied" #
|
|
# searchscope="subtree" #
|
|
# binddn="cn=Manager,dc=brainbox,dc=cc" #
|
|
# bindauth="mysecretpass" #
|
|
# verbose="yes" #
|
|
# host="$uid.$ou.inspircd.org"> #
|
|
# #
|
|
# <ldapwhitelist cidr="10.42.0.0/16"> #
|
|
# #
|
|
# <ldaprequire attribute="attr" value="val"> #
|
|
# #
|
|
# The baserdn indicates the base DN to search in for users. Usually #
|
|
# this is 'ou=People,dc=yourdomain,dc=yourtld'. #
|
|
# #
|
|
# The attribute value indicates the attribute which is used to locate #
|
|
# a user account by name. On POSIX systems this is usually 'uid'. #
|
|
# #
|
|
# The server parameter indicates the LDAP server to connect to. The #
|
|
# ldap:// style scheme before the hostname proper is MANDATORY. #
|
|
# #
|
|
# The allowpattern value allows you to specify a wildcard mask which #
|
|
# will always be allowed to connect regardless of if they have an #
|
|
# account, for example guest users. #
|
|
# #
|
|
# Killreason indicates the QUIT reason to give to users if they fail #
|
|
# to authenticate. #
|
|
# #
|
|
# The searchscope value indicates the subtree to search under. On our #
|
|
# test system this is 'subtree'. Your mileage may vary. #
|
|
# #
|
|
# Setting the verbose value causes an oper notice to be sent out for #
|
|
# every failed authentication to the server, with an error string. #
|
|
# #
|
|
# The binddn and bindauth indicate the DN to bind to for searching, #
|
|
# and the password for the distinguished name. Some LDAP servers will #
|
|
# allow anonymous searching in which case these two values do not #
|
|
# need defining, otherwise they should be set similar to the examples #
|
|
# above. #
|
|
# #
|
|
# ldapwhitelist indicates that clients connecting from an IP in the #
|
|
# provided CIDR do not need to authenticate against LDAP. It can be #
|
|
# repeated to whitelist multiple CIDRs. #
|
|
# #
|
|
# ldaprequire allows further filtering on the LDAP user, by requiring #
|
|
# certain LDAP attibutes to have a given value. It can be repeated, #
|
|
# in which case the list will act as an OR list, that is, the #
|
|
# authentication will succeed if any of the requirements in the list #
|
|
# is satisfied. #
|
|
# #
|
|
# host allows you to change the displayed host of users connecting #
|
|
# from ldap. The string supplied takes formatters which are replaced #
|
|
# from the DN. For instance, if your DN looks like: #
|
|
# uid=w00t,ou=people,dc=inspircd,dc=org, then the formatters uid, ou #
|
|
# and dc will be available to you. If a key is given multiple times #
|
|
# in the DN, the last appearance will take precedence. #
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# LDAP oper configuration module: Adds the ability to authenticate #
|
|
# opers via LDAP. This is an extra module which must be enabled #
|
|
# explicitly by symlinking it from modules/extra, and requires the #
|
|
# OpenLDAP libs. Re-run configure with: #
|
|
# ./configure --enable-extras=m_ldapoper.cpp
|
|
# and run make install, then uncomment this module to enable it. #
|
|
#<module name="m_ldapoper.so">
|
|
# #
|
|
# Configuration: #
|
|
# #
|
|
# <ldapoper baserdn="ou=People,dc=brainbox,dc=cc"
|
|
# server="ldap://brainwave.brainbox.cc"
|
|
# searchscope="subtree"
|
|
# binddn="cn=Manager,dc=brainbox,dc=cc"
|
|
# bindauth="mysecretpass"
|
|
# attribute="uid">
|
|
# #
|
|
# Available configuration items are identical to the same items in #
|
|
# m_ldapauth above (except for the verbose setting, that is only #
|
|
# supported in m_ldapauth). #
|
|
# Please always specify a password in your <oper> tags even if the #
|
|
# opers are to be authenticated via LDAP, so in case this module is #
|
|
# not loaded the oper accounts are still protected by a password. #
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Lock server module: Adds /LOCKSERV and /UNLOCKSERV commands that #
|
|
# are used to temporarily close/open the server for new connections. #
|
|
# These commands require that the /LOCKSERV and /UNLOCKSERV commands #
|
|
# are specified in a <class> tag that the oper is part of. This is so #
|
|
# you can control who has access to this possible dangerous command. #
|
|
# If your server is locked and you get disconnected, do a REHASH from #
|
|
# shell to open up again. #
|
|
# This module is oper-only.
|
|
<module name="m_lockserv.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Map hiding module: replaces /MAP and /LINKS output to users with a #
|
|
# message to see a website, set by maphide="http://test.org/map" in #
|
|
# the <security> tag, instead. #
|
|
#<module name="m_maphide.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Message flood module: Adds message/notice flood protection via
|
|
# channel mode +f.
|
|
<module name="m_messageflood.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# MLOCK module: Adds support for server-side enforcement of services
|
|
# side MLOCKs. Basically, this module suppresses any mode change that
|
|
# would likely be immediately bounced by services.
|
|
#<module name="m_mlock.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# MsSQL module: Allows other SQL modules to access MS SQL Server
|
|
# through a unified API.
|
|
# This module is in extras. Re-run configure with:
|
|
# ./configure --enable-extras=m_mssql.cpp
|
|
# and run make install, then uncomment this module to enable it.
|
|
#<module name="m_mssql.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# m_mssql.so is more complex than described here, see wiki for more #
|
|
# info http://wiki.inspircd.org/Modules/mssql #
|
|
#
|
|
#<database module="mssql" name="db" user="user" pass="pass" host="localhost" id="db1">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# MySQL module: Allows other SQL modules to access MySQL databases
|
|
# through a unified API.
|
|
# This module is in extras. Re-run configure with:
|
|
# ./configure --enable-extras=m_mysql.cpp
|
|
# and run make install, then uncomment this module to enable it.
|
|
#<module name="m_mysql.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# m_mysql.so is more complex than described here, see the wiki for #
|
|
# more: http://wiki.inspircd.org/Modules/mysql #
|
|
#
|
|
#<database module="mysql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database2">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Named modes module: Allows for the display and set/unset of channel
|
|
# modes via long-form mode names via +Z and the /PROP command.
|
|
# For example, to set a ban, do /mode #channel +Z ban=foo!bar@baz or
|
|
# /PROP #channel ban=foo!bar@baz
|
|
#<module name="m_namedmodes.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# NAMESX module: Provides support for the NAMESX extension which allows
|
|
# clients to see all the prefixes set on a user without getting confused.
|
|
# This is supported by mIRC, x-chat, klient, and maybe more.
|
|
<module name="m_namesx.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# National characters module:
|
|
# 1) Allows using national characters in nicknames.
|
|
# 2) Allows using custom (national) casemapping over the network.
|
|
#<module name="m_nationalchars.so">
|
|
#
|
|
# file - Location of the file which contains casemapping rules. If this
|
|
# is a relative path then it is relative to "<PWD>/../locales"
|
|
# on UNIX and "<PWD>/locales" on Windows.
|
|
# casemapping - The name of the casemapping sent to clients in the 005
|
|
# numeric. If this is not set then it defaults to the name
|
|
# of the casemapping file unless the file name contains a
|
|
# space in which case you will have to specify it manually.
|
|
#<nationalchars file="bynets/russian-w1251-charlink" casemapping="ru_RU.cp1251-charlink">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Nickchange flood protection module: Provides channel mode +F X:Y
|
|
# which allows up to X nick changes in Y seconds.
|
|
#<module name="m_nickflood.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Nicklock module: Let opers change a user's nick and then stop that
|
|
# user from changing their nick again until unlocked.
|
|
# This module is oper-only.
|
|
# To use, NICKLOCK and NICKUNLOCK must be in one of your oper class blocks.
|
|
#<module name="m_nicklock.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# No CTCP module: Adds the channel mode +C to block CTCPs and extban
|
|
# 'C' to block CTCPs sent by specific users.
|
|
#<module name="m_noctcp.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# No kicks module: Adds the +Q channel mode and the Q: extban to deny
|
|
# certain users from kicking.
|
|
#<module name="m_nokicks.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# No nicks module: Adds the +N channel mode, as well as the 'N' extban.
|
|
# +N stops all users from changing their nick, the N extban stops
|
|
# anyone from matching a +b N:nick!user@host mask from changing their
|
|
# nick.
|
|
#<module name="m_nonicks.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# No part message module: Adds extban 'p' to block part messages from #
|
|
# matching users. #
|
|
#<module name="m_nopartmsg.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# No notice module: Adds the channel mode +T and the extban 'T' to
|
|
# block specific users from noticing the channel.
|
|
#<module name="m_nonotice.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Network business join module:
|
|
# Allows an oper to join a channel using /OJOIN, giving them +Y on the
|
|
# channel which makes them immune to kick/deop/etc.
|
|
<module name="m_ojoin.so">
|
|
#
|
|
# Specify the prefix that +Y will grant here.
|
|
# Leave 'prefix' empty if you do not wish +Y to grant a prefix.
|
|
# If 'notice' is set to on, upon /OJOIN, the server will notice the
|
|
# channel saying that the oper is joining on network business.
|
|
# If 'op' is set to on, it will give them +o along with +Y.
|
|
<ojoin prefix="!" notice="yes" op="yes">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Oper channels mode: Adds the +O channel mode and extban O:<mask>
|
|
# to ban, except, etc. specific oper types. For example
|
|
# /mode #channel +iI O:* is equivalent to channel mode +O, but you
|
|
# may also set +iI O:AdminTypeOnly to only allow admins.
|
|
# Modes +I and +e work in a similar fashion.
|
|
#<module name="m_operchans.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Oper join module: Auto-joins opers to a channel upon oper-up.
|
|
# This module is oper-only. For the user equivalent, see m_conn_join.
|
|
<module name="m_operjoin.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-# OPERJOIN CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# If you are using the m_operjoin.so module, specify options here: #
|
|
# #
|
|
# channel - The channel name to join, can also be a comma #
|
|
# separated list e.g. "#channel1,#channel2". #
|
|
# #
|
|
# override - If on, lets the oper join walking thru any modes #
|
|
# that might be set, even bans. #
|
|
# #
|
|
<operjoin channel="#private" override="no">
|
|
#
|
|
# Alternatively you can use the autojoin="channellist" in a <type> #
|
|
# tag to set specific autojoins for a type of oper, for example: #
|
|
#
|
|
#<type name="Helper" autojoin="#help" classes="...">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Oper log module: Logs all oper commands to the server log (with log
|
|
# type "m_operlog" at default loglevel), and optionally to the 'r'
|
|
# snomask.
|
|
# This module is oper-only.
|
|
<module name="m_operlog.so">
|
|
#
|
|
# If the following option is on then all oper commands will be sent to
|
|
# the snomask 'r'. The default is off.
|
|
<operlog tosnomask="on">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Oper prefixing module: Adds a channel prefix mode +y which is given
|
|
# to all IRC operators automatically on all channels they are in.
|
|
# This prefix mode is more powerful than channel op and other regular
|
|
# prefix modes.
|
|
#
|
|
# Load this module if you want all your IRC operators to have channel
|
|
# operator powers.
|
|
<module name="m_operprefix.so">
|
|
#
|
|
# You may additionally customise the prefix character.
|
|
<operprefix prefix="^">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Oper MOTD module: Provides support for separate message of the day
|
|
# on oper-up.
|
|
# This module is oper-only.
|
|
#<module name="m_opermotd.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-# OPERMOTD CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# If you are using the m_opermotd.so module, specify the motd here. #
|
|
# #
|
|
# onoper - If on, the message is sent on /OPER, otherwise it's #
|
|
# only sent when /OPERMOTD is used. #
|
|
# #
|
|
# processcolors - Allow color codes to be processed in the opermotd. #
|
|
# Read the comment above <connect:allowmotdcolors> in #
|
|
# inspircd.conf.example for details. #
|
|
# #
|
|
#<opermotd file="conf/examples/opermotd.txt.example" onoper="yes" processcolors="false">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Override module: Adds support for oper override.
|
|
# This module is oper-only.
|
|
#<module name="m_override.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-# OVERRIDE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# m_override.so is too complex it describe here, see the wiki: #
|
|
# http://wiki.inspircd.org/Modules/override #
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Oper levels module: Gives each oper a level and prevents actions
|
|
# being taken by lower level opers against higher level opers.
|
|
# Specify the level as the 'level' parameter of the <type> tag.
|
|
# This module is oper-only.
|
|
#<module name="m_operlevels.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Oper modes module: Allows you to specify modes to add/remove on oper.
|
|
# Specify the modes as the 'modes' parameter of the <type> tag
|
|
# and/or as the 'modes' parameter of the <oper> tag.
|
|
# This module is oper-only. For the user equivalent, see m_conn_umodes.
|
|
<module name="m_opermodes.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Password forwarding module: Forwards a password users can send on
|
|
# connect to the specified client below. The client is usually NickServ
|
|
# and this module is usually used to authenticate users with NickServ
|
|
# using their connect password.
|
|
<module name="m_passforward.so">
|
|
|
|
<passforward
|
|
# nick: nick to forward connect passwords to.
|
|
nick="NickServ"
|
|
|
|
# forwardmsg: Message to send to users using a connect password.
|
|
# $nick will be the users' nick, $nickrequired will be the nick
|
|
# of where the password is going (the nick above).
|
|
# You can also use $user for the user ident string.
|
|
forwardmsg="NOTICE $nick :*** Forwarding PASS to $nickrequired"
|
|
|
|
# cmd: Command for the user to run when it receives a connect
|
|
# password.
|
|
cmd="PRIVMSG $nickrequired :IDENTIFY $pass">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Password hash module: Allows hashed passwords to be used.
|
|
# To be useful, a hashing module like m_sha256.so also needs to be loaded.
|
|
<module name="m_password_hash.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-# PASSWORD HASH CONFIGURATION #-#-#-#-#-#-#-#-#-#-#-#
|
|
#
|
|
# To use this module, you must define a hash type for each oper's
|
|
# password you want to hash. For example:
|
|
#
|
|
# <oper name="Brain"
|
|
# host="ident@dialup15.isp.test.com"
|
|
# hash="sha256"
|
|
# password="01ba4719c80b6fe911b091a7c05124b64eeece964e09c058ef8f9805daca546b"
|
|
# type="NetAdmin">
|
|
#
|
|
# Starting from 2.0, you can use a more secure salted hash that prevents simply
|
|
# looking up the hash's value in a rainbow table built for the hash.
|
|
# hash="hmac-sha256" password="lkS1Nbtp$CyLd/WPQXizsbxFUTqFRoMvaC+zhOULEeZaQkUJj+Gg"
|
|
#
|
|
# Generate hashes using the /MKPASSWD command on the server.
|
|
# Don't run it on a server you don't trust with your password.
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Permanent channels module: Channels with the permanent channel mode
|
|
# will remain open even after everyone else has left the channel, and
|
|
# therefore keep things like modes, ban lists and topic. Permanent
|
|
# channels -may- need support from your Services package to function
|
|
# properly with them. This adds channel mode +P.
|
|
# This module is oper-only.
|
|
<module name="m_permchannels.so">
|
|
#
|
|
# If you like, m_permchannels can write a config file of permanent channels
|
|
# whenever +P is set, unset, or the topic/modes on a +P channel is changed.
|
|
# If you want to do this, set the filename below, and uncomment the include.
|
|
#
|
|
# If 'listmodes' is true then all list modes (+b, +I, +e, +g...) will be
|
|
# saved. Defaults to false.
|
|
<permchanneldb filename="/etc/inspircd/data/permchannels.conf" listmodes="true">
|
|
<include file="/etc/inspircd/data/permchannels.conf">
|
|
#
|
|
# You may also create channels on startup by using the <permchannels> block.
|
|
# Don't forget to set them +P in the modes, or they won't stay permanent.
|
|
#<permchannels channel="#opers" modes="isP" topic="Opers only.">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# PostgreSQL module: Allows other SQL modules to access PgSQL databases
|
|
# through a unified API.
|
|
# This module is in extras. Re-run configure with:
|
|
# ./configure --enable-extras=m_pgsql.cpp
|
|
# and run make install, then uncomment this module to enable it.
|
|
#<module name="m_pgsql.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# m_pgsql.so is more complex than described here, see the wiki for #
|
|
# more: http://wiki.inspircd.org/Modules/pgsql #
|
|
#
|
|
#<database module="pgsql" name="mydb" user="myuser" pass="mypass" host="localhost" id="my_database" ssl="no">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Muteban: Implements extended ban 'm', which stops anyone matching
|
|
# a mask like +b m:nick!user@host from speaking on channel.
|
|
<module name="m_muteban.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Random quote module: Provides a random quote on connect.
|
|
# NOTE: Some of these may mimic fatal errors and confuse users and
|
|
# opers alike - BEWARE!
|
|
#<module name="m_randquote.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#- RANDOMQUOTES CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# Optional - If you specify to use the m_randquote.so module, then #
|
|
# specify below the path to the quotes file. #
|
|
# #
|
|
#<randquote file="quotes.txt">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Redirect module: Adds channel redirection mode +L. #
|
|
# Optional: <redirect:antiredirect> to add usermode +L to stop forced #
|
|
# redirection and instead print an error. #
|
|
# #
|
|
# Note: You can not update this with a simple rehash, it requires #
|
|
# reloading the module for it to take effect. #
|
|
# This also breaks linking to servers that do not have the option. #
|
|
# This defaults to false for the 2.0 version, it will be enabled in #
|
|
# all the future versions. #
|
|
#<module name="m_redirect.so">
|
|
#<redirect antiredirect="true">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Regular expression provider for glob or wildcard (?/*) matching.
|
|
# You must have at least 1 provider loaded to use m_filter or m_rline
|
|
# modules. This module has no additional requirements, as it uses the
|
|
# matching already present in InspIRCd core.
|
|
<module name="m_regex_glob.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Regular expression provider for PCRE (Perl-Compatible Regular
|
|
# Expressions). You need libpcre installed to compile and load this
|
|
# module. You must have at least 1 provider loaded to use m_filter or
|
|
# m_rline.
|
|
#<module name="m_regex_pcre.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Regular expression provider for POSIX regular expressions.
|
|
# You shouldn't need any additional libraries on a POSIX-compatible
|
|
# system (i.e.: any Linux, BSD, but not Windows). You must have at
|
|
# least 1 provider loaded to use m_filter or m_rline.
|
|
# On POSIX-compliant systems, regex syntax can be found by using the
|
|
# command: 'man 7 regex'.
|
|
#<module name="m_regex_posix.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Regular expression provider for C++11 std::regex regular expressions.
|
|
# This module works on any fully compliant implementation of the C++11
|
|
# std::regex container. Examples for such are Visual C++ 2010 and newer
|
|
# but not libstdc++ (which GCC uses).
|
|
# You should verify that std::regex is supported by your setup before
|
|
# using this module, as it may compile normally but won't do anything
|
|
# on some implementations.
|
|
#<module name="m_regex_stdlib.so">
|
|
#
|
|
# Specify the regular expression engine to use here. Valid settings are
|
|
# bre, ere, awk, grep, ecmascript (default if not specified).
|
|
#<stdregex type="ecmascript">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Regular expression provider for TRE regular expressions.
|
|
# This is the same regular expression engine used by UnrealIRCd, so
|
|
# if you are most familiar with the syntax of /SPAMFILTER from there,
|
|
# this is the provider you want. You need libtre installed in order
|
|
# to compile and load this module.
|
|
#<module name="m_regex_tre.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Registered users only channel creation module. If enabled, only
|
|
# registered users and opers can create new channels.
|
|
#
|
|
# You probably *DO NOT* want to load this module on a public network.
|
|
#
|
|
#<module name="m_regonlycreate.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Remove module: Adds the /REMOVE command which is a peaceful
|
|
# alternative to /KICK.
|
|
#<module name="m_remove.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Restricted channels module: Allows only opers to create channels.
|
|
#
|
|
# You probably *DO NOT* want to load this module on a public network.
|
|
#
|
|
#<module name="m_restrictchans.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Restrict message module: Allows users to only message opers.
|
|
#
|
|
# You probably *DO NOT* want to load this module on a public network.
|
|
#
|
|
#<module name="m_restrictmsg.so">
|
|
#
|
|
# Uncomment this to allow users to message ulines (e.g. services):
|
|
#<restrictmsg uline="yes">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# R-Line module: Ban users through regular expression patterns.
|
|
#<module name="m_rline.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-#- RLINE CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
#
|
|
# If you wish to re-check a user when they change nickname (can be
|
|
# useful under some situations, but *can* also use CPU with more users
|
|
# on a server) then set 'matchonnickchange' to yes.
|
|
# Also, this is where you set what Regular Expression engine is to be
|
|
# used. If you ever change it while running, all of your R-Lines will
|
|
# be wiped. This is the regex engine used by all R-Lines set, and
|
|
# m_regex_<engine>.so must be loaded, or rline will be non-functional
|
|
# until you load it or change the engine to one that is loaded.
|
|
#
|
|
#<rline matchonnickchange="yes" engine="pcre">
|
|
#
|
|
# Generally, you will NOT want to use 'glob' here, as this turns
|
|
# rline into just another gline. The exceptions are that rline will
|
|
# always use the full "nick!user@host realname" string, rather than only
|
|
# user@host, but beware that only the ? and * wildcards are available,
|
|
# and are the only way to specify where the space can occur if you do
|
|
# use glob. For this reason, is recommended to use a real regex engine
|
|
# so that at least \s or [[:space:]] is available.
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SAJOIN module: Adds the /SAJOIN command which forcibly joins a user
|
|
# to the given channel.
|
|
# This module is oper-only.
|
|
# To use, SAJOIN must be in one of your oper class blocks.
|
|
<module name="m_sajoin.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SAKICK module: Adds the /SAKICK command which kicks a user from the
|
|
# given channel.
|
|
# This module is oper-only.
|
|
# To use, SAKICK must be in one of your oper class blocks.
|
|
<module name="m_sakick.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SAMODE module: Adds the /SAMODE command which allows server operators
|
|
# to change modes on a channel without requiring them to have any
|
|
# channel priviliges. Also allows changing user modes for any user.
|
|
# This module is oper-only.
|
|
# To use, SAMODE must be in one of your oper class blocks.
|
|
<module name="m_samode.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SANICK module: Adds the /SANICK command which allows opers to change
|
|
# users' nicks.
|
|
# This module is oper-only.
|
|
# To use, SANICK must be in one of your oper class blocks.
|
|
<module name="m_sanick.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SAPART module: Adds the /SAPART command which forcibly parts a user
|
|
# from a channel.
|
|
# This module is oper-only.
|
|
# To use, SAPART must be in one of your oper class blocks.
|
|
<module name="m_sapart.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SAQUIT module: Adds the /SAQUIT command which forcibly quits a user.
|
|
# This module is oper-only.
|
|
# To use, SAQUIT must be in one of your oper class blocks.
|
|
<module name="m_saquit.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SATOPIC module: Adds the /SATOPIC command which allows changing the
|
|
# topic on a channel without requiring any channel priviliges.
|
|
# This module is oper-only.
|
|
# To use, SATOPIC must be in one of your oper class blocks.
|
|
<module name="m_satopic.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SASL authentication module: Provides support for IRC Authentication
|
|
# Layer via AUTHENTICATE. Note: You also need to have m_cap.so loaded
|
|
# for SASL to work.
|
|
<module name="m_sasl.so">
|
|
<sasl target="ircservices.{{ external_domain }}">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Secure list module: Prevent /LIST in the first minute of connection,
|
|
# crippling most spambots and trojan spreader bots.
|
|
<module name="m_securelist.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-# SECURELIST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# Securelist can be harmful to some IRC search engines such as #
|
|
# netsplit.de and searchirc.com. To prevent securelist blocking these #
|
|
# sites from listing, define exception tags as shown below: #
|
|
#<securehost exception="*@*.searchirc.org">
|
|
#<securehost exception="*@*.netsplit.de">
|
|
#<securehost exception="*@echo940.server4you.de">
|
|
#<securehost exception="*@*.ircdriven.com">
|
|
# #
|
|
# Define the following variable to change how long a user must wait #
|
|
# before issuing a LIST. If not defined, defaults to 60 seconds. #
|
|
# #
|
|
<securelist waittime="60"> #
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Servprotect module: Provides support for Austhex style +k /
|
|
# UnrealIRCD +S services mode.
|
|
#<module name="m_servprotect.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# See nicks module: Adds snomask +n and +N which show local and remote
|
|
# nick changes.
|
|
# This module is oper-only.
|
|
#<module name="m_seenicks.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Set idle module: Adds a command for opers to change their idle time.
|
|
# This module is oper-only.
|
|
# To use, SETIDLE must be in one of your oper class blocks.
|
|
#<module name="m_setidle.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Services support module: Adds several usermodes such as +R and +M.
|
|
# This module implements the 'identified' state via account names,
|
|
# and is similar in operation to the way asuka and ircu handle services.
|
|
#
|
|
# At the same time, this offers +r for users and channels to mark them
|
|
# as identified separately from the idea of a master account, which
|
|
# can be useful for services which are heavily nick-as-account centric.
|
|
#
|
|
# Also of note is that this module implements two extbans:
|
|
# +b R: (stop matching account names from joining)
|
|
# +b U:n!u@h (blocks matching unregistered users)
|
|
#
|
|
<module name="m_services_account.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Sethost module: Adds the /SETHOST command.
|
|
# This module is oper-only.
|
|
# To use, SETHOST must be in one of your oper class blocks.
|
|
# See m_chghost for how to customise valid chars for hostnames.
|
|
<module name="m_sethost.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Setident module: Adds the /SETIDENT command.
|
|
# This module is oper-only.
|
|
# To use, SETIDENT must be in one of your oper class blocks.
|
|
<module name="m_setident.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SETNAME module: Adds the /SETNAME command.
|
|
<module name="m_setname.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Serverban: Implements extended ban 's', which stops anyone connected
|
|
# to a server matching a mask like +b s:server.mask.here from joining.
|
|
#<module name="m_serverban.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Show whois module: Adds the +W usermode which allows opers to see
|
|
# when they are /WHOIS'd.
|
|
# This module is oper-only by default.
|
|
#<module name="m_showwhois.so">
|
|
#
|
|
# If you wish, you may also let users set this mode. Only opers with the
|
|
# users/auspex priv will see real hosts of people, though. This setting
|
|
# is not reloadable via /REHASH, changing it requires /RELOADMODULE.
|
|
#<showwhois opersonly="yes">
|
|
#
|
|
# You may also set whether or not users should receive whois notices,
|
|
# should they be /WHOIS'd by an oper.
|
|
#<showfromopers="yes">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Shun module: Provides the /SHUN command, which stops a user from
|
|
# executing all except configured commands.
|
|
# This module is oper-only.
|
|
# To use, SHUN must be in one of your oper class blocks.
|
|
#<module name="m_shun.so">
|
|
#
|
|
# You may also configure which commands you wish a user to be able to
|
|
# perform when shunned. It should be noted that if a shunned user
|
|
# issues QUIT or PART then their message will be removed, as if they
|
|
# did not issue one.
|
|
#
|
|
# You can optionally let the user know that their command was blocked.
|
|
#
|
|
# You may also let SHUN affect opers (defaults to no).
|
|
#<shun enabledcommands="PING PONG QUIT PART JOIN" notifyuser="yes" affectopers="no">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SSL channel mode module: Adds support for SSL-only channels via
|
|
# channel mode +z and the 'z' extban which matches SSL client
|
|
# certificate fingerprints.
|
|
# Does not do anything useful without a working SSL module (see below).
|
|
<module name="m_sslmodes.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# GnuTLS SSL module: Adds support for SSL connections using GnuTLS,
|
|
# if enabled. You must answer 'yes' in ./configure when asked or
|
|
# manually symlink the source for this module from the directory
|
|
# src/modules/extra, if you want to enable this, or it will not load.
|
|
#<module name="m_ssl_gnutls.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- GNUTLS CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# m_ssl_gnutls.so is too complex to describe here, see the wiki: #
|
|
# http://wiki.inspircd.org/Modules/ssl_gnutls #
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SSL info module: Allows users to retrieve information about other
|
|
# users' peer SSL certificates and keys. This can be used by client
|
|
# scripts to validate users. For this to work, one of m_ssl_gnutls.so
|
|
# or m_ssl_openssl.so must be loaded. This module also adds the
|
|
# "* <user> is using a secure connection" whois line, the ability for
|
|
# opers to use SSL fingerprints to verify their identity and the
|
|
# ability to force opers to use SSL connections in order to oper up.
|
|
# It is highly recommended to load this module if you use SSL on your
|
|
# network.
|
|
# For how to use the oper features, please see the first example <oper> tag
|
|
# in opers.conf.example.
|
|
#
|
|
#<module name="m_sslinfo.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# OpenSSL SSL module: Adds support for SSL connections using OpenSSL,
|
|
# if enabled. You must answer 'yes' in ./configure when asked or symlink
|
|
# the source for this module from the directory src/modules/extra, if
|
|
# you want to enable this, or it will not load.
|
|
<module name="m_ssl_openssl.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- OPENSSL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# m_ssl_openssl.so is too complex to describe here, see the wiki: #
|
|
# http://wiki.inspircd.org/Modules/ssl_openssl #
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Strip color module: Adds channel mode +S that strips mIRC color
|
|
# codes from all messages sent to the channel.
|
|
<module name="m_stripcolor.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Silence module: Adds support for the /SILENCE command, which allows
|
|
# users to have a server-side ignore list for their client.
|
|
#<module name="m_silence.so">
|
|
#
|
|
# Set the maximum number of entries allowed on a user's silence list.
|
|
#<silence maxentries="32">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SQLite3 module: Allows other SQL modules to access SQLite3 #
|
|
# databases through a unified API. #
|
|
# This module is in extras. Re-run configure with: #
|
|
# ./configure --enable-extras=m_sqlite.cpp
|
|
# and run make install, then uncomment this module to enable it. #
|
|
#
|
|
#<module name="m_sqlite3.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#-#- SQL CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# m_sqlite.so is more complex than described here, see the wiki for #
|
|
# more: http://wiki.inspircd.org/Modules/sqlite3 #
|
|
#
|
|
#<database module="sqlite" hostname="/full/path/to/database.db" id="anytext">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SQL authentication module: Allows IRCd connections to be tied into
|
|
# a database table (for example a forum).
|
|
# This module is in extras. Re-run configure with:
|
|
# ./configure --enable-extras=m_sqlauth.cpp
|
|
# and run make install, then uncomment this module to enable it.
|
|
#
|
|
#<module name="m_sqlauth.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- SQLAUTH CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# m_sqlauth.so is too complex to describe here, see the wiki: #
|
|
# http://wiki.inspircd.org/Modules/sqlauth #
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SQL oper module: Allows you to store oper credentials in an SQL table
|
|
# This module is in extras. Re-run configure with:
|
|
# ./configure --enable-extras=m_sqloper.cpp
|
|
# and run make install, then uncomment this module to enable it.
|
|
#
|
|
#<module name="m_sqloper.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- SQLOPER CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# dbid - Database ID to use (see SQL modules). #
|
|
# hash - Hashing provider to use for password hashing. #
|
|
# #
|
|
# See also: http://wiki.inspircd.org/Modules/sqloper #
|
|
# #
|
|
#<sqloper dbid="1" hash="md5">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SVSHold module: Implements SVSHOLD. Like Q:Lines, but can only be #
|
|
# added/removed by Services. #
|
|
#<module name="m_svshold.so">
|
|
# If silent is true no snotices will be generated by SVSHOLD.
|
|
#<svshold silent="false">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# SWHOIS module: Allows you to add arbitrary lines to user WHOIS.
|
|
# This module is oper-only.
|
|
# To use, SWHOIS must be in one of your oper class blocks.
|
|
#<module name="m_swhois.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Test module: Enable this to create a command useful in testing
|
|
# flood control. To avoid accidental use on live networks, the server
|
|
# name must contain ".test" to load the module
|
|
#<module name="m_testnet.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Timed bans module: Adds timed channel bans with the /TBAN command.
|
|
#<module name="m_timedbans.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Test line module: Adds the /TLINE command, used to test how many
|
|
# users a /GLINE or /ZLINE etc. would match.
|
|
# This module is oper-only.
|
|
# To use, TLINE must be in one of your oper class blocks.
|
|
<module name="m_tline.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Topiclock module: implements server-side topic locking to achieve deeper
|
|
# integration with services packages.
|
|
<module name="m_topiclock.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# UHNAMES support module: Adds support for the IRCX style UHNAMES
|
|
# extension, which displays ident and hostname in the names list for
|
|
# each user, saving clients from doing a WHO on the channel.
|
|
# If a client does not support UHNAMES it will not enable it, this will
|
|
# not break incompatible clients.
|
|
#<module name="m_uhnames.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Uninvite module: Adds the /UNINVITE command which lets users remove
|
|
# pending invites from channels without waiting for the user to join.
|
|
#<module name="m_uninvite.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Userip module: Adds the /USERIP command.
|
|
# Allows users to query their own IP, also allows opers to query the IP
|
|
# of anyone else.
|
|
<module name="m_userip.so">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Vhost module: Adds the VHOST command which allows for adding virtual
|
|
# hosts which are accessible using a username and password in the config.
|
|
<module name="m_vhost.so">
|
|
#
|
|
#-#-#-#-#-#-#-#-#-#-#- VHOST CONFIGURATION -#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# #
|
|
# user - Username for the vhost. #
|
|
# #
|
|
# pass - Password for the vhost. #
|
|
# #
|
|
# hash - The hash for the specific user (optional) #
|
|
# m_password_hash.so and a hashing module must be loaded #
|
|
# for this to work. #
|
|
# #
|
|
# host - Vhost to set. #
|
|
#
|
|
#<vhost user="some_username" pass="some_password" host="some.host.test.cc">
|
|
#<vhost user="foo" password="fcde2b2edba56bf408601fb721fe9b5c338d10ee429ea04fae5511b68fbf8fb9" hash="sha256" host="some.other.host.example.com">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Watch module: Adds the WATCH command, which is used by clients to
|
|
# maintain notify lists.
|
|
#<module name="m_watch.so">
|
|
#
|
|
# Set the maximum number of entries on a user's watch list below.
|
|
#<watch maxentries="32">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# XLine database: Stores all *Lines (G/Z/K/R/any added by other modules)
|
|
# in a file which is re-loaded on restart. This is useful
|
|
# for two reasons: it keeps bans so users may not evade them, and on
|
|
# bigger networks, server connections will take less time as there will
|
|
# be a lot less bans to apply - as most of them will already be there.
|
|
#<module name="m_xline_db.so">
|
|
|
|
# Specify the filename for the xline database here.
|
|
<xlinedb filename="/etc/inspircd/data/xline.db">
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# ____ _ _____ _ _ ____ _ _ _ #
|
|
# | _ \ ___ __ _ __| | |_ _| |__ (_)___ | __ )(_) |_| | #
|
|
# | |_) / _ \/ _` |/ _` | | | | '_ \| / __| | _ \| | __| | #
|
|
# | _ < __/ (_| | (_| | | | | | | | \__ \ | |_) | | |_|_| #
|
|
# |_| \_\___|\__,_|\__,_| |_| |_| |_|_|___/ |____/|_|\__(_) #
|
|
# #
|
|
# To link servers to InspIRCd, you MUST load the m_spanningtree #
|
|
# module. If you don't do this, server links will NOT work at all. #
|
|
# This is by design, to allow for the implementation of other linking #
|
|
# protocols in modules in the future. #
|
|
|
|
#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
|
|
# Spanning tree module: Allows linking of servers using the spanning
|
|
# tree protocol (see the READ THIS BIT section above).
|
|
# You will almost always want to load this.
|
|
#
|
|
<module name="m_spanningtree.so">
|