Replace openntpd with chronyd for reliability

AdminScripts/shadowarch-sync

@@ -9,19 +9,17 @@
 # 
 # Author: DarkFeather <darkfeather@aninix.net>
 
-# seconds=10
-# echo "This will sync your /etc files with the AniNIX defaults and add the AniNIX
-# GPG key for pacman." 
-# echo "Proceeding in $seconds seconds. Is this OK? [YES/no] " 
-# timeout $seconds cat | read answer
-# if [[ "${answer,,}" =~ ^n ]]; then
-#     exit 0;
-# fi
+seconds=10
+echo "Syncing in $seconds seconds. Press Ctrl+C to cancel."
+sleep $seconds
 
-rsync -avz /opt/aninix/ShadowArch/etc/ /etc/
-keyid=D9DC5933A1B0D4F7
+# AniNIX GPG Package Signing
+keyid=1CC1E3F4ED06F296
 if ! gpg --homedir /etc/pacman.d/gnupg --list-key "${keyid}"; then
-    pacman-key --add /usr/share/pacman/keyrings/aninix.gpg
+    pacman-key --recv-key "${keyid}"
     pacman-key --finger "${keyid}"
     pacman-key --lsign-key "${keyid}"
 fi
+
+# Sync configuration
+rsync -avz /opt/aninix/ShadowArch/etc/ /etc/

EtcFiles/Makefile

@@ -11,9 +11,11 @@ install: compile
 	mkdir -p ${pkgdir}/opt/aninix/ShadowArch/etc/
 	mkdir -p ${pkgdir}/usr/lib/systemd/system
 	mkdir -p ${pkgdir}/etc/pacman.d/hooks
+	mkdir -p ${pkgdir}/usr/share/vim/vimfiles/plugin/
 	for i in ${syncList}; do cp "$$i" ${pkgdir}/opt/aninix/ShadowArch/etc/; done
 	for i in ${serviceList}; do cp "$$i" ${pkgdir}/usr/lib/systemd/system/"$$i"; done
 	for i in ${pacmanHooks}; do cp "$$i" ${pkgdir}/etc/pacman.d/hooks/"$$i"; done
+	cp ./shadowarch.vim ${pkgdir}/usr/share/vim/vimfiles/plugin/shadowarch.vim
 	cp -pr ./skel ${pkgdir}/opt/aninix/ShadowArch/etc
 
 repository: shadowarch ${httpRoot}

EtcFiles/bashrc

@@ -6,28 +6,43 @@
 [[ $- != *i* ]] && return
 
 ### Prompt ###
-organization="$(hostname | rev | cut -f 2 -d '.' | rev)"
-PS1='\[\033[00;31m\][ '"${organization^^}"'::\h/\[\033[01;32m\]\u \[\033[00;31m\]\\\\\\\\ ${SHELL} {\[\033[m\]$? \[\033[00;36m\]\D{%F-%R} \[\033[00;35m\]\w\[\033[00;31m\]\[\033[00;31m\]} ]\n|\[\033[m\]> '
+organization="$(echo $HOSTNAME | rev | cut -f 2 -d '.' | rev)"
+PS1='\[\033[00;31m\][ \[\033[01;32m\]\u\[\033[00;31m\]@\H:${SHELL} {\[\033[m\]$? \[\033[00;36m\]\D{%F-%R} \[\033[00;35m\]\w\[\033[00;31m\]\[\033[00;31m\]\[\033[00;33m\]$(git_prompt_var)\[\033[00;31m\]} ]\n|\[\033[m\]> '
 PS2='> '
 PS3='> '
 PS4='+ '
 case ${TERM} in
-    xterm*|rxvt*|Eterm|aterm|kterm|gnome*)
-        PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;AniNIX::%s \134\134 %s in %s\007" "${HOSTNAME%%.*}" "${USER}" "${PWD/#$HOME/\~}"'
-
-        ;;
-    screen)
-        PROMPT_COMMAND=${PROMPT_COMMAND:+$PROMPT_COMMAND; }'printf "\033]0;AniNIX::%s \134\134 %s in %s\007" "${HOSTNAME%%.*}" "${USER}" "${PWD/#$HOME/\~}"'
+    screen|xterm*|rxvt*|Eterm|aterm|kterm|gnome*)
+        PROMPT_COMMAND='echo -en "\033]0;'${organization^^}'/'${HOSTNAME%%.*}'\a"'
         ;;
 esac
 
+# Terminal settings
+export TERM=xterm-256color
+alias weechat="TERM=screen weechat"
+
+# Disable bracketed paste mode
+printf "\e[?2004l"
+
 ### MOTD ###
 [ -f /etc/bash.motd ] && cat /etc/bash.motd
 
 ### AniNIX Customizations ###
 alias get-commands='for i in $( echo $PATH | sed "s/:/\n/g"); do ls $i; done | sort | less'
 alias whoison='who | grep -v tmux'
-alias startvnc="vncserver -xstartup startxfce4; echo Use \"ssh -L 5901:localhost:5901 $(whoami)@$(hostname)\" to tunnel connections."
+function vncdesktop() {
+    set -x
+    if [ -z "$@" ]; then
+        vncserver :2 -rfbport 5901
+    else
+        vncserver $@
+    fi
+    export DISPLAY=`vncserver -list | tail -n 1 | awk '{print $1; }' `
+    sleep 3
+    xfce4-session
+    vncserver -kill "$DISPLAY"
+    set +x
+}
 alias vi=vim
 alias view="vim -R"
 alias top="top -o %CPU"
@@ -38,21 +53,52 @@ fi
 IFS="
 "
 
+### GIT ###
+source /usr/share/git/completion/git-prompt.sh
+
+function git_prompt_var() {
+    ### If $PWD is a Git repo, add URL and branch to PS1
+    url=`git config remote.origin.url 2>/dev/null`
+    if [ -n "$url" ]; then
+        branch=`__git_ps1 '%s'`
+        url=`basename "$url"`
+        echo " $url($branch)"
+    fi
+}
+
 ### SSH ###
-# Aliases for hosts
-if [ -f ~/.ssh/config ]; then
-    for i in `egrep '^Host' ~/.ssh/config | grep -v \* | cut -f 2 -d ' '`; do
-        alias "$i"="ssh $i";
-    done
-fi
 # Tell shell about ssh-agent -- enable with 'systemctl enable ssh-agent@$USER.service'
-export SSH_AGENT_PID="$(ps -fu "$USER" | grep -v grep | grep -m 1 ssh-agent | awk '{ print $2; }')"
+export SSH_AGENT_PID="$(pgrep -fu "$USER" ssh-agent)"
 if [ -n "$SSH_AGENT_PID" ]; then
-    export SSH_AUTH_SOCK="$(ls -1 /tmp/ssh-*/agent.$(( $SSH_AGENT_PID - 1 )))"
+    export SSH_AUTH_SOCK="$(ls -ld /tmp/ssh-*/agent.* | grep -m 1 "$USER" | awk '{ print $9; }')"
     echo ssh-agent PID is $SSH_AGENT_PID
 fi
+if [ -n "$SSH_AUTH_SOCK" ] && [ `ssh-add -L | grep -c no\ identities` -eq 1 ]; then
+    ssh-add
+    ssh-add -L
+fi
+
+### GPG ###
+export GPG_TTY=$(tty)
+
+### Ansible ###
+export ANSIBLE_VAULT_PASSWORD_FILE=$HOME/password-store/${organization}.vault.password
+export ANSIBLE_VAULT_FILE=$HOME/password-store/${organization}.vault
+
+# ### User-directory .gitbare Support (Git) ###
+# if [ -d ~/.git ]; then
+#     cd 
+#     printf "~/.git: "
+#     if [ $SHLVL -eq 1 ] && [ -z "$TMUX" ]; then
+#         git pull
+#     else
+#         git rev-parse --short HEAD
+#     fi
+#     git status
+# fi
+# 
 # Set up screen/tmux safety nest by default for remote sessions
-if [ ! -z "$SSH_CLIENT" ]; then 
+if [ -n "$SSH_CLIENT" ]; then 
     # Prefer tmux
    if [ -x "$(which tmux 2>/dev/null)" ] && [ -z "$TMUX" ]; then 
         if [ `tmux list-sessions | grep created | wc -l` -eq 0 ]; then
@@ -63,20 +109,9 @@ if [ ! -z "$SSH_CLIENT" ]; then
             tmux list-sessions
         fi
         alias tat="exec tmux a -d -t"
-    # Fallback on Screen
-    elif [ -x "$(which screen 2>/dev/null)" ] && [ "$TERM" != "screen" ]; then
-        if [ `screen -list | grep -c 'Detached'` -eq 1 ]; then
-            exec screen -r
-        elif [ `screen -list | grep -c 'No Sockets found in '` -eq 1 ] && [ "$TERM" != "screen" ]; then
-            exec /usr/bin/screen /bin/bash
-        else 
-            screen -list
-        fi 
-        alias sdr="screen -d -r"
     fi;
 
 ### XFCE4 ###
 elif [ `who -m | egrep "^$(whoami)" | awk '{ print $2; }' | egrep -c "^tty"` -eq 1 ] && [ -x /usr/sbin/startxfce4 ] && [ `pgrep -ac xinit` -eq 0 ] && [ `whoami` != 'root' ]; then
     exec startxfce4
 fi
-

EtcFiles/pacman.conf

@@ -101,7 +101,7 @@ Include = /etc/pacman.d/mirrorlist
 #SigLevel = Optional TrustAll
 #Server = file:///home/custompkgs
 
-[aninix]
+[AniNIX]
 SigLevel = Required DatabaseOptional
 Server = https://aninix.net/maat/
 

EtcFiles/profile

@@ -3,9 +3,30 @@
 #Set our umask
 umask 022
 
-# Set our default path
-PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:~/bin"
+# Append "$1" to $PATH when not already in.
+# This function API is accessible to scripts in /etc/profile.d
+append_path () {
+    case ":$PATH:" in
+        *:"$1":*)
+            ;;
+        *)
+            PATH="${PATH:+$PATH:}$1"
+    esac
+}
+
+# Append our default paths
+append_path '/usr/local/sbin'
+append_path '/usr/local/bin'
+append_path '/usr/sbin'
+append_path '/usr/bin'
+append_path '/sbin'
+append_path '/bin'
+append_path '~/bin'
+
+# Force PATH to be environment
 export PATH
+
+# Set IFS to be newline delimited
 IFS="
 "
 export IFS
@@ -18,8 +39,16 @@ if test -d /etc/profile.d/; then
 	unset profile
 fi
 
-# Source global bash config
-if test "$PS1" && test "$BASH" && test -r /etc/bashrc; then
+# Unload our profile API functions
+unset -f append_path
+
+# Source global bash config, when interactive but not posix or sh mode
+if test "$BASH" &&\
+   test "$PS1" &&\
+   test -z "$POSIXLY_CORRECT" &&\
+   test "${0#-}" != sh &&\
+   test -r /etc/bashrc
+then
 	. /etc/bashrc
 fi
 
@@ -28,5 +57,3 @@ unset TERMCAP
 
 # Man is much better than us at figuring this out
 unset MANPATH
-
-

EtcFiles/shadowarch

@@ -2,8 +2,7 @@
 
 function header () {
     tput setaf 1
-    tput bold
-    echo $@
+    tput bold echo $@
     tput sgr0
     return
 }
@@ -18,10 +17,10 @@ function help() {
     echo '\-l FILE -- Log to a file'
     echo '\-p      -- Productivity package additions'
     echo '\-P      -- Power saving for laptops'
-    echo '\-s      -- Create a layout for an AniNIX::Spartacus'
+    echo '\-s      -- Create a layout for an AniNIX/Spartacus'
     echo '\-m      -- Skip disk operations and assume storage is mounted on /mnt'
     echo '\-v      -- Verbose output.'
-    echo '\-z      -- Try to add all the packages on AniNIX::Core'
+    echo '\-z      -- Try to add all the packages on AniNIX/Core'
     exit 1;
 }
 
@@ -76,6 +75,12 @@ if [ "$answer" != "YES" ]; then
     echo User did not confirm.
     exit 1;
 fi
+echo >> /etc/pacman.conf <EOM
+[AniNIX]
+SigLevel = Optional TrustAll
+Server = https://aninix.net/maat/
+EOM
+
 pacman -Syy
 if [ -z "$nodiskbuild" ]; then
     header Allocating space
@@ -156,9 +161,9 @@ fi
 # * make for source packages
 # * tor for anonymity
 header Installing ArchLinux to device\(s\) on /mnt
-export pkglist="base base-devel parted net-tools bind-tools git openssh make elinks weechat vim wget tor torsocks grub os-prober rsync openntpd tmux efibootmgr"
+export pkglist="base base-devel parted net-tools bind-tools git openssh make elinks weechat vim wget tor torsocks grub os-prober rsync chrony tmux efibootmgr shadowarch"
 if [ ! -z "$gui" ]; then 
-    export pkglist="$pkglist"" xorg-server xfce4 chromium conky tigervnc xscreensaver"
+    export pkglist="$pkglist"" xorg-server xfce4 hunspell hunspell-en_US thunar-archive-plugin thunar-media-tags-plugin thunar-volman chromium conky tigervnc xscreensaver"
 fi
 if [ ! -z "$spartacus" ]; then
     export pkglist="$pkglist"" exfat-utils"
@@ -213,7 +218,7 @@ arch-chroot /mnt grub-mkconfig -o /boot/grub/grub.cfg
 if [ $? -ne 0 ]; then header ERROR: Cannot continue; exit 1; fi
 
 header Set networking
-arch-chroot /mnt systemctl enable openntpd
+arch-chroot /mnt systemctl enable chronyd
 arch-chroot /mnt systemctl enable netctl
 export interface=$(ip link list | grep "state" | cut -f 2 -d ":" | cut -f 2 -d " " | grep -v lo)
 cp /mnt/etc/netctl/examples/ethernet-dhcp /mnt/etc/netctl/$interface
@@ -275,20 +280,6 @@ if [ ! -z "$audio" ]; then
     printf 'echo 2048 > /sys/class/rtc/rtc0/max_user_freq\necho 2048 > /proc/sys/dev/hpet/max-user-freq\n' >> /mnt/etc/rc.local
 fi
 
-# Emulate old rc.local behavior
-touch /mnt/etc/rc.local
-echo '[Unit]
-Description=Execute commands at boot
-
-[Service]
-ExecStart=/etc/rc.local
-
-[Install]
-WantedBy=multi-user.target' > /mnt/usr/lib/systemd/system/rclocal.service
-arch-chroot /mnt systemctl enable rclocal
-arch-chroot /mnt chmod 0700 /etc/rc.local
-arch-chroot /mnt chown root: /etc/rc.local
-
 # Set password
 header Set new root passphrase and depriviledged user '(depriv)' password.
 arch-chroot /mnt passwd
@@ -311,12 +302,12 @@ fi
 
 # Set hostname
 header Set hostname
-printf "What is your fully-qualified hostname? (i.e. core.aninix.net) "
+printf "What is your fully-qualified hostname? (i.e. host.site.example.com) "
 read hostname
 echo "$hostname" > /mnt/etc/hostname
 hostname "$hostname"
 
-header Installed ShadowArch on AniNIX::`hostname -s`\! 
+header "Installed ShadowArch on $HOSTNAME!" 
 if [ ! -z "$nodiskbuild" ]; then
     header Remember to run grub-install and set up your bootloader.
     echo 'https://wiki.archlinux.org/index.php/Installation_guide#Boot_loader'

EtcFiles/shadowarch.vim

@@ -0,0 +1 @@
+set mouse-=a

EtcFiles/ssh-agent@.service

@@ -3,7 +3,7 @@ Description=SSH-Agent for User %I
 After=network.target shadow.service
 
 [Service]
-ExecStart=ssh-agent -s
+ExecStart=/usr/bin/ssh-agent -s
 ExecReload=/bin/kill -HUP $MAINPID
 Type=oneshot
 KillMode=process

EtcFiles/tmux@.service

@@ -3,10 +3,12 @@ Description=TMUX/Weechat Session for User %I
 After=network.target shadow.service
 
 [Service]
-ExecStart=/usr/sbin/tmux new-session -d -c IRC weechat
+Environment=HOME=/home/%I
+WorkingDirectory=/home/%I
+ExecStart=/usr/bin/tmux new-session -d -s IRC "weechat"
 ExecReload=/bin/kill -HUP $MAINPID
 KillMode=process
-Restart=on-failed
+Restart=no
 Type=oneshot
 User=%I
 Group=%I

Makefile

@@ -5,7 +5,6 @@ compile: ${LIST}
 
 install: compile 
 	mkdir -p ${pkgdir}/usr/share/pacman/keyrings
-	cp ./aninix.gpg ${pkgdir}/usr/share/pacman/keyrings
 	for i in ${LIST}; do make -C ./$$i install; done
 
 reverse: 

PKGBUILD

@@ -1,23 +1,22 @@
-# Maintainer: Shikoba Kage <darkfeather@aninix.net>
-pkgname="$(git config remote.origin.url | rev | cut -f 1 -d '/' | rev | sed 's/.git$//' | tr '[[:upper:]]' '[[:lower:]]')"
+depends=('curl' 'grep' 'bash>=4.4' 'git>=2.13' 'elinks')
+makedepends=('make>=4.2')
+checkdepends=()
+optdepends=()
+pkgname="$(git config remote.origin.url | rev | cut -f 1 -d '/' | rev | sed 's/.git$//')"
 pkgver="$(git describe --tag --abbrev=0)"."$(git rev-parse --short HEAD)"
 pkgrel=1
 pkgrel() { 
-    git log "$(git describe --tag --abbrev=0)"..HEAD | grep -c commit
+    echo $(( `git log "$(git describe --tag --abbrev=0)"..HEAD | grep -c commit` + 1 ))
 }
-epoch=
+epoch="$(git log | grep -c commit)"
 pkgdesc="$(head -n 1 README)"
 arch=("x86_64")
 url="https://aninix.net/foundation/${pkgname}"
 license=('custom')
 groups=()
-depends=('curl' 'grep' 'bash>=4.4' 'git>=2.13')
-makedepends=('make>=4.2')
-checkdepends=()
-optdepends=()
-provides=('shadowarch')
+provides=("${pkgname}")
 conflicts=()
-replaces=('aninix-misc-scripts')
+replaces=("${pkgname,,}", "aninix-${pkgname,,}")
 backup=()
 options=()
 install=
@@ -36,7 +35,8 @@ build() {
 }
 
 check() {
-	printf 'quit\n\n' | make -C .. test
+    chmod -R u+r ../pkg
+	make -C .. test
 }
 
 package() {

README

@@ -1,6 +0,0 @@
-AniNIX::ShadowArch \\ AniNIX preferred shell environment
-
-This package holds core files for our environment.
-* EtcFiles: Core configuration for our experience
-* AdminScripts: Scripts requiring root access for administration
-* UserScripts: Useful user-space deprivileged scripts

README.md

@@ -0,0 +1,107 @@
+ShadowArch is an installation of [ArchLinux](https://www.archlinux.org/) following a general list of installed packages and configuration. We provide scripts to install the underlying OS and configure it, but we do not distribute ArchLinux software.
+
+This package holds core files for our environment.
+* EtcFiles: Core configuration for our experience
+* AdminScripts: Scripts requiring root access for administration
+* UserScripts: Useful user-space deprivileged scripts
+
+# How to Install ShadowArch
+The AniNIX provides an installer to install ShadowArch and some basic clients for its services, similar to the [KickStart concept from RHEL/CentOS](https://serverfault.com/questions/517908/how-to-create-a-custom-iso-image-in-centos#521672).
+
+1. Acquire a read-write storage device and some hardware with at least 256M of RAM and one core.
+1. [https://archlinux.org/download Download the Arch ISO] and boot the VM or host from that.
+1. Run the following to minimally install ShadowArch:
+   1.  `wget https://aninix.net/shadowarch; vi shadowarch; bash shadowarch`
+   1.  Some flags are listed below.
+1. If you run across trouble, take a look at the Troubleshooting section at the bottom.
+
+# Defaults 
+These are installed by default with the base package of ShadowArch, along with the ArchLinux base packages, grub, parted, os-prober, net-tools, bind-tools, and wget.
+* git for source-code access
+* elinks for browsing
+* openssh for remote access
+* weechat for IRC
+* make for compiling source
+* tor for privacy
+* tmux for terminal control and resumability.
+
+Particularly in virtualized environments, ShadowArch has not had good luck with PulseAudio -- we instead rely on the default ALSA for sound. Especially when trying to play sound remotely, [AniNIX Yggdrasil](/AniNIX/Wiki/Services/Yggdrasil.md) is superior to PulseAudio over SSH due to the SSH overhead and buffering.
+
+## Encryption
+ShadowArch generally uses serpent-xts-plain64 with a sha512 hash and 512 keysize. If you choose not to encrypt your drive, you will need to edit the script accordingly in the storage layout section. When the ShadowArch install boots, it will prompt for a password unless you set up a crypttab for the root.
+
+If you do encrypt your root on a server, you should look at [adding IP to mkinitcpio](https://wiki.archlinux.org/index.php/Mkinitcpio#Using_net) and [the encryptssh](https://wiki.archlinux.org/index.php/Dm-crypt/Specialties#Remote_unlocking_of_the_root_.28or_other.29_partition) hook. We recommend assigning a static IP for NAT forwarding rules and using the dropbear AUR package.
+
+ShadowArch will encrypt your storage with the -e flag.
+
+## GUI 
+The -g flag will add a graphical desktop environment (startxfce4), GUI browser (seamonkey), and resource visualizer (conky). You're welcome to replace this desktop environment with KDE, GNOME, Cinnamon, i3, or any other DE of choice, but we have found XFCE4 to be reliable and easy to configure.
+
+Mac set some [standard keybinds](https://en.wikipedia.org/wiki/Keyboard_shortcut) that we abide by. Please note that the ⌘ character translates to the "Ctrl" key on most keyboards and "Super" translates to the Windows or ⊞ key on most keyboards. We assume QWERTY and standard Windows-style keyboards that saturate the market today. Some applications, like vim or tmux, will have their own keybinds, but most like Chromium or libreoffice will respect near-global defaults. The Alt key in particular will allow menu navigation in most applications -- this is really helpful for minimize mouse activity.
+
+Some keybinds preferred for ShadowArch GUI management are below.
+{|class="wikitable"
+|-
+| Super+B || Open Browser
+|-
+| Super+T || Open Terminal emulator
+|-
+| Super+R || Run Command
+|-
+| Super+E || File Explorer
+|-
+| Super+ArrowUp || Maximize current window
+|-
+| Super+ArrowDown || Minimize current window
+|-
+| Super+ArrowLeft || Snap window left
+|-
+| Super+ArrowRight || Snap window right
+|-
+| Super+PageUp || Next Workspace
+|-
+| Super+PageDown || Previous Workspace
+|-
+| Ctrl+Alt+[Number] || Move window to workspace [number]
+|}
+
+<b>Note:</b> Standalone machines may benefit from sound tuning found in [the Arch Wiki](https://wiki.archlinux.org/index.php/Professional_audio) for "professional audio."
+
+## Productivity 
+LibreOffice is the package of choice for office productivity (powerpoints, documents, and spreadsheets), and gIMP is the image editor of choice. We include feh for images, VLC for video and music, and evince as a reader. We are searching for video and audio editors.
+
+## Holocron 
+: The -s flag is reserved for [Holocron](/AniNIX/Wiki/Entities/Holocron.md).
+
+# Emulating ShadowArch in Other Environments
+## XFCE4 in Linux
+Clone the [https://aninix.net/foundation/MiscScripts/ MiscScripts] repository from the Foundation and use the contents of ShadowArch/skel/ to set up your home folder. You may have to find additional themes that meet your needs -- we use stock Xfce-dusk.
+
+## CLI Customizations
+We include the following customizations:
+* A tty-allow local group that is required for non-root users to have local access
+* Auto-created aliases for all the hosts defined in a user's ~/.ssh/known_hosts and the local Irssi configs
+* A PS1 that includes the last exit code, organization, hostname, OS type, user, date, and working directory.
+* VNC and Tor Lynx aliases
+* Autostarting and resuming tmux (or screen) sessions for remote logins
+* Some niceties for Makefile, top, and vim support
+
+## Windows
+1. Desktop themes can be established with [https://aninix.net/wolfpack/aninix.deskthemepack a provided deskthemepack file].
+1. [Chrome](https://www.google.com/chrome/) with [DuckDuckGo](https://duckduckgo.com/) as the default search engine is our browser recommendation. This can be bound to the ShadowArch-like keybind with Start > Chrome > Right-click > Open File Location > Right-click icon > Properties and set the shortcut key to B. We presently don't have a way to bind the Super key in the same way.
+1. Terminal Emulator can be provided by either Powershell or [PuTTY](http://www.putty.org/), depending on where shell activity should live. Use the same steps as the browser above to set the keybind.
+1. Default Windows Explorer and its keybinds equate to the XFCE4 thunar application used by ShadowArch. The Run and Explorer keybinds natively present in Windows will map.
+1. Default Windows Aero window managment will map to the ShaodowArch keybinds.
+1. Workspace management won't be quite the same, but this [CNET article](https://www.cnet.com/how-to/how-to-use-multiple-desktops-in-windows-10/) offers some help on understanding the difference. The Windows environment is a bit more dynamic so it requires more keybinds.
+
+# References
+* [The ArchLinux Wiki](https://wiki.archlinux.org/) is an invaluable source of information, particularly around packages deployed by ShadowArch hosts.
+These are some known issues the users of ShadowArch have come across with weird reasons.
+
+# Troubleshooting
+
+## No Audio
+Make sure the user is in the audio group on the system and alsamixer is not muted.
+
+## No Desktop
+Run xfdesktop -- sometimes xinit loses this execution and the desktop doesn't display.

UserScripts/whatismyip

@@ -1,2 +1,2 @@
 #!/bin/bash
-/usr/bin/lynx -connect_timeout=5 -read_timeout=5 --dump whatismyipaddress.com | grep '/ip/' | head -n 1 | cut -f 5 -d '/'
+timeout 5 /usr/bin/elinks --dump whatismyipaddress.com | grep '/ip/' | head -n 1 | cut -f 5 -d '/'