Catching up Sharingan, Geth, and ShadowArch roles

This commit is contained in:
DarkFeather 2022-05-25 14:50:16 -05:00
parent 8b2b0be95b
commit 59b54619f7
Signed by: DarkFeather
GPG Key ID: 1CC1E3F4ED06F296
21 changed files with 509 additions and 1503 deletions

2
.gitignore vendored
View File

@ -1,6 +1,8 @@
roles/Node/files/*-vm.service roles/Node/files/*-vm.service
roles/Nazara/files/dns roles/Nazara/files/dns
roles/Nazara/files/dhcp roles/Nazara/files/dhcp
roles/Node/files/vm-definitions/**
roles/ShadowArch/files/mirrorlist
venv/ venv/
**pkg.tar.zst **pkg.tar.zst

View File

@ -38,7 +38,7 @@ function tmuxHosts() {
host2="$2" host2="$2"
host3="$3" host3="$3"
host4="$4" host4="$4"
name="ansible-tmux-$offset" name="$group-$offset"
# If no TMUX session started, then add one with four panes. # If no TMUX session started, then add one with four panes.
if [ -z "$TMUX" ]; then if [ -z "$TMUX" ]; then

View File

@ -1,29 +0,0 @@
#!/usr/bin/env python3
# File: modules/net-detect
#
# Description: This module detects network hosts and creates an Ansible playbook for them.
#
# Package: AniNIX/Tenebrous
# Copyright: WTFPL
#
# Author: DarkFeather <darkfeather@aninix.net>
import os
import re
import nmap3
import yaml
prdre = re.compile('core*')
devre = re.compile('darknet*|maat*|sharingan*|')
gethre = re.compile('geth*|nazara*')
shadowfeedre = re.compile('shadowfeed*')
nmap = nmap3.Nmap()
function main():
"""
Main operation
"""

View File

@ -25,4 +25,4 @@
tasks: tasks:
- debug: - debug:
msg: "{{ lookup('vars',variablename) }}" msg: "{{ lookup('vars',variablename) | default('undefined') }}"

View File

@ -0,0 +1,41 @@
# These are the default options to lircd, if installed as
# /etc/lirc/lirc_options.conf. See the lircd(8) and lircmd(8)
# manpages for info on the different options.
#
# Some tools including mode2 and irw uses values such as
# driver, device, plugindir and loglevel as fallback values
# in not defined elsewhere.
[lircd]
nodaemon = False
driver = default
device = /dev/lirc0
output = /var/run/lirc/lircd
pidfile = /var/run/lirc/lircd.pid
plugindir = /usr/lib/arm-linux-gnueabihf/lirc/plugins
permission = 666
allow-simulate = No
repeat-max = 600
#effective-user =
#listen = [address:]port
#connect = host[:port]
#loglevel = 6
#release = true
#release_suffix = _EVUP
#logfile = ...
#driver-options = ...
[lircmd]
uinput = False
nodaemon = False
# [modinit]
# code = /usr/sbin/modprobe lirc_serial
# code1 = /usr/bin/setfacl -m g:lirc:rw /dev/uinput
# code2 = ...
# [lircd-uinput]
# add-release-events = False
# release-timeout = 200
# release-suffix = _EVUP

View File

@ -1,770 +1,174 @@
# Rename this distribution example file to motion.conf # Rename this distribution example file to motion.conf
# #
# This config file was generated by motion 4.0.1 # This config file was generated by motion 4.3.2
# Documentation: /usr/share/doc/motion/motion_guide.html
#
# This file contains only the basic configuration options to get a
# system working. There are many more options available. Please
# consult the documentation for the complete list of all options.
#
############################################################ ############################################################
# Daemon # System control configuration parameters
############################################################ ############################################################
# Start in daemon (background) mode and release terminal (default: off) # Start in daemon (background) mode and release terminal.
daemon on daemon off
# File to store the process ID, also called pid file. (default: not defined) # Start in Setup-Mode, daemon disabled.
process_id_file /var/run/motion/motion.pid
############################################################
# Basic Setup Mode
############################################################
# Start in Setup-Mode, daemon disabled. (default: off)
setup_mode off setup_mode off
# File to store the process ID.
; pid_file value
# Use a file to save logs messages, if not defined stderr and syslog is used. (default: not defined) # File to write logs messages into. If not defined stderr and syslog is used.
;logfile /tmp/motion.log log_file /var/log/motion/motion.log
# Level of log messages [1..9] (EMG, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL). (default: 6 / NTC) # Level of log messages [1..9] (EMG, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL).
log_level 6 log_level 6
# Filter to log messages by type (COR, STR, ENC, NET, DBL, EVT, TRK, VID, ALL). (default: ALL) # Target directory for pictures, snapshots and movies
log_type all target_dir /var/lib/motion
########################################################### # Video device (e.g. /dev/video0) to be used for capturing.
# Capture device options
############################################################
# Videodevice to be used for capturing (default /dev/video0)
# for FreeBSD default is /dev/bktr0
videodevice /dev/video0 videodevice /dev/video0
# v4l2_palette allows one to choose preferable palette to be use by motion # Parameters to control video device. See motion_guide.html
# to capture from those supported by your videodevice. (default: 17) ; vid_control_params value
# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
# Setting v4l2_palette to 2 forces motion to use V4L2_PIX_FMT_SBGGR8
# instead.
#
# Values :
# V4L2_PIX_FMT_SN9C10X : 0 'S910'
# V4L2_PIX_FMT_SBGGR16 : 1 'BYR2'
# V4L2_PIX_FMT_SBGGR8 : 2 'BA81'
# V4L2_PIX_FMT_SPCA561 : 3 'S561'
# V4L2_PIX_FMT_SGBRG8 : 4 'GBRG'
# V4L2_PIX_FMT_SGRBG8 : 5 'GRBG'
# V4L2_PIX_FMT_PAC207 : 6 'P207'
# V4L2_PIX_FMT_PJPG : 7 'PJPG'
# V4L2_PIX_FMT_MJPEG : 8 'MJPEG'
# V4L2_PIX_FMT_JPEG : 9 'JPEG'
# V4L2_PIX_FMT_RGB24 : 10 'RGB3'
# V4L2_PIX_FMT_SPCA501 : 11 'S501'
# V4L2_PIX_FMT_SPCA505 : 12 'S505'
# V4L2_PIX_FMT_SPCA508 : 13 'S508'
# V4L2_PIX_FMT_UYVY : 14 'UYVY'
# V4L2_PIX_FMT_YUYV : 15 'YUYV'
# V4L2_PIX_FMT_YUV422P : 16 '422P'
# V4L2_PIX_FMT_YUV420 : 17 'YU12'
#
v4l2_palette 17
# Tuner device to be used for capturing using tuner as source (default /dev/tuner0) # The full URL of the network camera stream.
# This is ONLY used for FreeBSD. Leave it commented out for Linux ; netcam_url value
; tunerdevice /dev/tuner0
# The video input to be used (default: -1) # Name of mmal camera (e.g. vc.ril.camera for pi camera).
# Should normally be set to 0 or 1 for video/TV cards, and -1 for USB cameras ; mmalcam_name value
# Set to 0 for uvideo(4) on OpenBSD
input -1
# The video norm to use (only for video capture and TV tuner cards) # Camera control parameters (see raspivid/raspistill tool documentation)
# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL) ; mmalcam_control_params value
norm 0
# The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0) ############################################################
frequency 0 # Image Processing configuration parameters
############################################################
# Override the power line frequency for the webcam. (normally not necessary) # Image width in pixels.
# Values:
# -1 : Do not modify device setting
# 0 : Power line frequency Disabled
# 1 : 50hz
# 2 : 60hz
# 3 : Auto
power_line_frequency -1
# Rotate image this number of degrees. The rotation affects all saved images as
# well as movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
rotate 0
# Image width (pixels). Valid range: Camera dependent, default: 352
width 640 width 640
# Image height (pixels). Valid range: Camera dependent, default: 288 # Image height in pixels.
height 480 height 480
# Maximum number of frames to be captured per second. # Maximum number of frames to be captured per second.
# Valid range: 2-100. Default: 100 (almost no limit). framerate 15
framerate 100
# Minimum time in seconds between capturing picture frames from the camera. # Rotate to fit
# Default: 0 = disabled - the capture rate is given by the camera framerate. rotate 90
# This option is used when you want to capture images at a rate lower than 2 per second.
minimum_frame_time 0
# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// mjpg:// rtsp:// mjpeg:// or file:///) # Text to be overlayed in the lower left corner of images
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. A trailing slash may be required for some cameras. text_left GETH-HUB-3
# Default: Not defined
; netcam_url value
# Username and password for network camera (only if required). Default: not defined # Text to be overlayed in the lower right corner of images.
# Syntax is user:password
; netcam_userpass value
# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
# off: The historical implementation using HTTP/1.0, closing the socket after each http request.
# force: Use HTTP/1.0 requests with keep alive header to reuse the same connection.
# on: Use HTTP/1.1 requests that support keep alive as default.
# Default: off
netcam_keepalive off
# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
# If a port number other than 80 is needed, use "http://myproxy:1234".
# Default: not defined
; netcam_proxy value
# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
# Default: off
netcam_tolerant_check off
# RTSP connection uses TCP to communicate to the camera. Can prevent image corruption.
# Default: on
rtsp_uses_tcp on
# Name of camera to use if you are using a camera accessed through OpenMax/MMAL
# Default: Not defined
; mmalcam_name vc.ril.camera
# Camera control parameters (see raspivid/raspistill tool documentation)
# Default: Not defined
; mmalcam_control_params -hf
# Let motion regulate the brightness of a video device (default: off).
# The auto_brightness feature uses the brightness option as its target value.
# If brightness is zero auto_brightness will adjust to average brightness value 128.
# Only recommended for cameras without auto brightness
auto_brightness off
# Set the initial brightness of a video device.
# If auto_brightness is enabled, this value defines the average brightness level
# which Motion will try and adjust to.
# Valid range 0-255, default 0 = disabled
brightness 0
# Set the contrast of a video device.
# Valid range 0-255, default 0 = disabled
contrast 0
# Set the saturation of a video device.
# Valid range 0-255, default 0 = disabled
saturation 0
# Set the hue of a video device (NTSC feature).
# Valid range 0-255, default 0 = disabled
hue 0
############################################################
# Round Robin (multiple inputs on same video device name)
############################################################
# Number of frames to capture in each roundrobin step (default: 1)
roundrobin_frames 1
# Number of frames to skip before each roundrobin step (default: 1)
roundrobin_skip 1
# Try to filter out noise generated by roundrobin (default: off)
switchfilter off
############################################################
# Motion Detection Settings:
############################################################
# Threshold for number of changed pixels in an image that
# triggers motion detection (default: 1500)
threshold 1500
# Automatically tune the threshold down if possible (default: off)
threshold_tune off
# Noise threshold for the motion detection (default: 32)
noise_level 32
# Automatically tune the noise threshold (default: on)
noise_tune on
# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
# Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
# (l)abeling must only be used once and the 'l' must be the last letter.
# Comment out to disable
despeckle_filter EedDl
# Detect motion in predefined areas (1 - 9). Areas are numbered like that: 1 2 3
# A script (on_area_detected) is started immediately when motion is 4 5 6
# detected in one of the given areas, but only once during an event. 7 8 9
# One or more areas can be specified with this option. Take care: This option
# does NOT restrict detection to these areas! (Default: not defined)
; area_detect value
# PGM file to use as a sensitivity mask.
# Full path name to. (Default: not defined)
; mask_file value
# Dynamically create a mask file during operation (default: 0)
# Adjust speed of mask changes from 0 (off) to 10 (fast)
smart_mask_speed 0
# Ignore sudden massive light intensity changes given as a percentage of the picture
# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
lightswitch 0
# Picture frames must contain motion at least the specified number of frames
# in a row before they are detected as true motion. At the default of 1, all
# motion is detected. Valid range: 1 to thousands, recommended 1-5
minimum_motion_frames 1
# Specifies the number of pre-captured (buffered) pictures from before motion
# was detected that will be output at motion detection.
# Recommended range: 0 to 5 (default: 0)
# Do not use large values! Large values will cause Motion to skip video frames and
# cause unsmooth movies. To smooth movies use larger values of post_capture instead.
pre_capture 0
# Number of frames to capture after motion is no longer detected (default: 0)
post_capture 0
# Event Gap is the seconds of no motion detection that triggers the end of an event.
# An event is defined as a series of motion images taken within a short timeframe.
# Recommended value is 60 seconds (Default). The value -1 is allowed and disables
# events causing all Motion to be written to one single movie file and no pre_capture.
# If set to 0, motion is running in gapless mode. Movies don't have gaps anymore. An
# event ends right after no more motion is detected and post_capture is over.
event_gap 60
# Maximum length in seconds of a movie
# When value is exceeded a new movie file is created. (Default: 0 = infinite)
max_movie_time 0
# Always save images even if there was no motion (default: off)
emulate_motion off
############################################################
# Image File Output
############################################################
# Output 'normal' pictures when motion is detected (default: on)
# Valid values: on, off, first, best, center
# When set to 'first', only the first picture of an event is saved.
# Picture with most motion of an event is saved when set to 'best'.
# Picture with motion nearest center of picture is saved when set to 'center'.
# Can be used as preview shot for the corresponding movie.
output_pictures off
# Output pictures with only the pixels moving object (ghost images) (default: off)
output_debug_pictures off
# The quality (in percent) to be used by the jpeg compression (default: 75)
quality 75
# Type of output images
# Valid values: jpeg, ppm (default: jpeg)
picture_type jpeg
############################################################
# FFMPEG related options
# Film (movies) file output, and deinterlacing of the video input
# The options movie_filename and timelapse_filename are also used
# by the ffmpeg feature
############################################################
# Use ffmpeg to encode movies in realtime (default: off)
ffmpeg_output_movies off
# Use ffmpeg to make movies with only the pixels moving
# object (ghost images) (default: off)
ffmpeg_output_debug_movies off
# Use ffmpeg to encode a timelapse movie
# Default value 0 = off - else save frame every Nth second
ffmpeg_timelapse 0
# The file rollover mode of the timelapse video
# Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
ffmpeg_timelapse_mode daily
# Bitrate to be used by the ffmpeg encoder (default: 400000)
# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
ffmpeg_bps 400000
# Enables and defines variable bitrate for the ffmpeg encoder.
# ffmpeg_bps is ignored if variable bitrate is enabled.
# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
# or the range 1 - 100 where 1 means worst quality and 100 is best.
ffmpeg_variable_bitrate 0
# Codec to used by ffmpeg for the video compression.
# Timelapse videos have two options.
# mpg - Creates mpg file with mpeg-2 encoding.
# If motion is shutdown and restarted, new pics will be appended
# to any previously created file with name indicated for timelapse.
# mpeg4 - Creates avi file with the default encoding.
# If motion is shutdown and restarted, new pics will create a
# new file with the name indicated for timelapse.
# Supported formats are:
# mpeg4 or msmpeg4 - gives you files with extension .avi
# msmpeg4 is recommended for use with Windows Media Player because
# it requires no installation of codec on the Windows client.
# swf - gives you a flash film with extension .swf
# flv - gives you a flash video with extension .flv
# ffv1 - FF video codec 1 for Lossless Encoding
# mov - QuickTime
# mp4 - MPEG-4 Part 14 H264 encoding
# mkv - Matroska H264 encoding
# hevc - H.265 / HEVC (High Efficiency Video Coding)
ffmpeg_video_codec mpeg4
# When creating videos, should frames be duplicated in order
# to keep up with the requested frames per second
# (default: true)
ffmpeg_duplicate_frames true
############################################################
# SDL Window
############################################################
# Number of motion thread to show in SDL Window (default: 0 = disabled)
#sdl_threadnr 0
############################################################
# External pipe to video encoder
# Replacement for FFMPEG builtin encoder for ffmpeg_output_movies only.
# The options movie_filename and timelapse_filename are also used
# by the ffmpeg feature
#############################################################
# Bool to enable or disable extpipe (default: off)
use_extpipe off
# External program (full path and opts) to pipe raw video to
# Generally, use '-' for STDIN...
;extpipe mencoder -demuxer rawvideo -rawvideo w=%w:h=%h:i420 -ovc x264 -x264encopts bframes=4:frameref=1:subq=1:scenecut=-1:nob_adapt:threads=1:keyint=1000:8x8dct:vbv_bufsize=4000:crf=24:partitions=i8x8,i4x4:vbv_maxrate=800:no-chroma-me -vf denoise3d=16:12:48:4,pp=lb -of avi -o %f.avi - -fps %fps
;extpipe x264 - --input-res %wx%h --fps %fps --bitrate 2000 --preset ultrafast --quiet -o %f.mp4
;extpipe mencoder -demuxer rawvideo -rawvideo w=%w:h=%h:fps=%fps -ovc x264 -x264encopts preset=ultrafast -of lavf -o %f.mp4 - -fps %fps
;extpipe ffmpeg -y -f rawvideo -pix_fmt yuv420p -video_size %wx%h -framerate %fps -i pipe:0 -vcodec libx264 -preset ultrafast -f mp4 %f.mp4
############################################################
# Snapshots (Traditional Periodic Webcam File Output)
############################################################
# Make automated snapshot every N seconds (default: 0 = disabled)
snapshot_interval 0
############################################################
# Text Display
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
# %v = event, %q = frame number, %t = camera id number,
# %D = changed pixels, %N = noise level, \n = new line,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event - do not use with text_event!
# You can put quotation marks around the text to allow
# leading spaces
############################################################
# Locate and draw a box around the moving object.
# Valid values: on, off, preview (default: off)
# Set to 'preview' will only draw a box in preview_shot pictures.
locate_motion_mode off
# Set the look and style of the locate box if enabled.
# Valid values: box, redbox, cross, redcross (default: box)
# Set to 'box' will draw the traditional box.
# Set to 'redbox' will draw a red box.
# Set to 'cross' will draw a little cross to mark center.
# Set to 'redcross' will draw a little red cross to mark center.
locate_motion_style box
# Draws the timestamp using same options as C function strftime(3)
# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
# Text is placed in lower right corner
text_right %Y-%m-%d\n%T-%q text_right %Y-%m-%d\n%T-%q
# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
; text_left GETH-HUB-1 %t
# Draw the number of changed pixed on the images (default: off)
# Will normally be set to off except when you setup and adjust the motion settings
# Text is placed in upper right corner
text_changes off
# This option defines the value of the special event conversion specifier %C
# You can use any conversion specifier in this option except %C. Date and time
# values are from the timestamp of the first image in the current event.
# Default: %Y%m%d%H%M%S
# The idea is that %C can be used filenames and text_left/right for creating
# a unique identifier for each event.
text_event %Y%m%d%H%M%S
# Draw characters at twice normal size on images. (default: off)
text_double off
# Text to include in a JPEG EXIF comment
# May be any text, including conversion specifiers.
# The EXIF timestamp is included independent of this text.
;exif_text %i%J/%K%L
############################################################ ############################################################
# Target Directories and filenames For Images And Films # Motion detection configuration parameters
# For the options snapshot_, picture_, movie_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = camera id number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################ ############################################################
# Target base directory for pictures and films # Always save pictures and movies even if there was no motion.
# Recommended to use absolute path. (Default: current working directory) emulate_motion off
target_dir /var/run/motion/capture
# File path for snapshots (jpeg or ppm) relative to target_dir # Threshold for number of changed pixels that triggers motion.
# Default: %v-%Y%m%d%H%M%S-snapshot threshold 1500
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
# File extension .jpg or .ppm is automatically added so do not include this.
# Note: A symbolic link called lastsnap.jpg created in the target_dir will always
# point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
snapshot_filename %v-%Y%m%d%H%M%S-snapshot
# File path for motion triggered images (jpeg or ppm) relative to target_dir # Noise threshold for the motion detection.
# Default: %v-%Y%m%d%H%M%S-%q ; noise_level 32
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
# File extension .jpg or .ppm is automatically added so do not include this
# Set to 'preview' together with best-preview feature enables special naming
# convention for preview shots. See motion guide for details
picture_filename %v-%Y%m%d%H%M%S-%q
# File path for motion triggered ffmpeg films (movies) relative to target_dir # Despeckle the image using (E/e)rode or (D/d)ilate or (l)abel.
# Default: %v-%Y%m%d%H%M%S despeckle_filter EedDl
# File extensions(.mpg .avi) are automatically added so do not include them
movie_filename %v-%Y%m%d%H%M%S
# File path for timelapse movies relative to target_dir # Number of images that must contain motion to trigger an event.
# Default: %Y%m%d-timelapse minimum_motion_frames 1
# File extensions(.mpg .avi) are automatically added so do not include them
timelapse_filename %Y%m%d-timelapse # Gap in seconds of no motion detected that triggers the end of an event.
event_gap 60
# The number of pre-captured (buffered) pictures from before motion.
pre_capture 3
# Number of frames to capture after motion is no longer detected.
post_capture 0
############################################################ ############################################################
# Global Network Options # Script execution configuration parameters
############################################################
# Enable IPv6 (default: off)
ipv6_enabled off
############################################################
# Live Stream Server
############################################################ ############################################################
# The mini-http server listens to this port for requests (default: 0 = disabled) # Command to be executed when an event starts.
stream_port 8081
# Quality of the jpeg (in percent) images produced (default: 50)
stream_quality 50
# Output frames at 1 fps when no motion is detected and increase to the
# rate given by stream_maxrate when motion is detected (default: off)
stream_motion off
# Maximum framerate for stream streams (default: 1)
stream_maxrate 1
# Restrict stream connections to localhost only (default: on)
stream_localhost off
# Limits the number of images per connection (default: 0 = unlimited)
# Number can be defined by multiplying actual stream rate by desired number of seconds
# Actual stream rate is the smallest of the numbers framerate and stream_maxrate
stream_limit 0
# Set the authentication method (default: 0)
# 0 = disabled
# 1 = Basic authentication
# 2 = MD5 digest (the safer authentication)
stream_auth_method 0
# Authentication for the stream. Syntax username:password
# Default: not defined (Disabled)
; stream_authentication username:password
# Percentage to scale the stream image for preview
# Default: 25
; stream_preview_scale 25
# Have stream preview image start on a new line
# Default: no
; stream_preview_newline no
############################################################
# HTTP Based Control
############################################################
# TCP/IP port for the http server to listen on (default: 0 = disabled)
webcontrol_port 8080
# Restrict control connections to localhost only (default: on)
webcontrol_localhost on
# Output for http server, select off to choose raw text plain (default: on)
webcontrol_html_output on
# Authentication for the http based control. Syntax username:password
# Default: not defined (Disabled)
; webcontrol_authentication username:password
############################################################
# Tracking (Pan/Tilt)
#############################################################
# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo, 6=servo)
# The generic type enables the definition of motion center and motion size to
# be used with the conversion specifiers for options like on_motion_detected
track_type 0
# Enable auto tracking (default: off)
track_auto off
# Serial port of motor (default: none)
;track_port /dev/ttyS0
# Motor number for x-axis (default: 0)
;track_motorx 0
# Set motorx reverse (default: 0)
;track_motorx_reverse 0
# Motor number for y-axis (default: 0)
;track_motory 1
# Set motory reverse (default: 0)
;track_motory_reverse 0
# Maximum value on x-axis (default: 0)
;track_maxx 200
# Minimum value on x-axis (default: 0)
;track_minx 50
# Maximum value on y-axis (default: 0)
;track_maxy 200
# Minimum value on y-axis (default: 0)
;track_miny 50
# Center value on x-axis (default: 0)
;track_homex 128
# Center value on y-axis (default: 0)
;track_homey 128
# ID of an iomojo camera if used (default: 0)
track_iomojo_id 0
# Angle in degrees the camera moves per step on the X-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_x 10
# Angle in degrees the camera moves per step on the Y-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_y 10
# Delay to wait for after tracking movement as number
# of picture frames (default: 10)
track_move_wait 10
# Speed to set the motor to (stepper motor option) (default: 255)
track_speed 255
# Number of steps to make (stepper motor option) (default: 40)
track_stepsize 40
############################################################
# External Commands, Warnings and Logging:
# You can use conversion specifiers for the on_xxxx commands
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = camera id number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# %f = filename with full path
# %n = number indicating filetype
# Both %f and %n are only defined for on_picture_save,
# on_movie_start and on_movie_end
# Quotation marks round string are allowed.
############################################################
# Do not sound beeps when detecting motion (default: on)
# Note: Motion never beeps when running in daemon mode.
quiet on
# Command to be executed when an event starts. (default: none)
# An event starts at first motion detected after a period of no motion defined by event_gap
; on_event_start value ; on_event_start value
# Command to be executed when an event ends after a period of no motion # Command to be executed when an event ends.
# (default: none). The period of no motion is defined by option event_gap.
; on_event_end value ; on_event_end value
# Command to be executed when a picture (.ppm|.jpg) is saved (default: none) # Command to be executed when a movie file is closed.
# To give the filename as an argument to a command append it with %f
; on_picture_save value
# Command to be executed when a motion frame is detected (default: none)
; on_motion_detected value
# Command to be executed when motion in a predefined area is detected
# Check option 'area_detect'. (default: none)
; on_area_detected value
# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_start value
# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_end value ; on_movie_end value
# Command to be executed when a camera can't be opened or if it is lost
# NOTE: There is situations when motion don't detect a lost camera!
# It depends on the driver, some drivers dosn't detect a lost camera at all
# Some hangs the motion thread. Some even hangs the PC! (default: none)
; on_camera_lost value
#####################################################################
# Common Options for database features.
# Options require database options to be active also.
#####################################################################
# Log to the database when creating motion triggered picture file (default: on)
; sql_log_picture on
# Log to the database when creating a snapshot image file (default: on)
; sql_log_snapshot on
# Log to the database when creating motion triggered movie file (default: off)
; sql_log_movie off
# Log to the database when creating timelapse movies file (default: off)
; sql_log_timelapse off
# SQL query string that is sent to the database
# Use same conversion specifiers has for text features
# Additional special conversion specifiers are
# %n = the number representing the file_type
# %f = filename with full path
# Default value:
# Create tables :
##
# Mysql
# CREATE TABLE security (camera int, filename char(80) not null, frame int, file_type int, time_stamp timestamp(14), event_time_stamp timestamp(14));
#
# Postgresql
# CREATE TABLE security (camera int, filename char(80) not null, frame int, file_type int, time_stamp timestamp without time zone, event_time_stamp timestamp without time zone);
#
# insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
; sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
############################################################ ############################################################
# Database Options # Picture output configuration parameters
############################################################ ############################################################
# database type : mysql, postgresql, sqlite3 (default : not defined) # Output pictures when motion is detected
; database_type value picture_output off
# database to log to (default: not defined)
# for sqlite3, the full path and name for the database.
; database_dbname value
# The host on which the database is located (default: localhost)
; database_host value
# User account name for database (default: not defined)
; database_user value
# User password for database (default: not defined)
; database_password value
# Port on which the database is located
# mysql 3306 , postgresql 5432 (default: not defined)
; database_port value
# Database wait time in milliseconds for locked database to
# be unlocked before returning database locked error (default 0)
; database_busy_timeout 0
# File name(without extension) for pictures relative to target directory
picture_filename %Y%m%d%H%M%S-%q
############################################################ ############################################################
# Video Loopback Device (vloopback project) # Movie output configuration parameters
############################################################ ############################################################
# Output images to a video4linux loopback device # Create movies of motion events.
# The value '-' means next available (default: not defined) movie_output on
; video_pipe value
# Output motion images to a video4linux loopback device # Maximum length of movie in seconds.
# The value '-' means next available (default: not defined) movie_max_time 60
; motion_video_pipe value
# The encoding quality of the movie. (0=use bitrate. 1=worst quality, 100=best)
movie_quality 45
# Container/Codec to used for the movie. See motion_guide.html
movie_codec mkv
# File name(without extension) for movies relative to target directory
movie_filename %t-%v-%Y%m%d%H%M%S
############################################################
# Webcontrol configuration parameters
############################################################
# Port number used for the webcontrol.
webcontrol_port 8080
# Restrict webcontrol connections to the localhost.
webcontrol_localhost on
# Type of configuration options to allow via the webcontrol.
webcontrol_parms 0
############################################################
# Live stream configuration parameters
############################################################
# The port number for the live stream.
stream_port 8081
# Restrict stream connections to the localhost.
stream_localhost off
############################################################## ##############################################################
# camera config files - One for each camera. # Camera config files - One for each camera.
# Except if only one camera - You only need this config file.
# If you have more than one camera you MUST define one camera
# config file for each camera in addition to this config file.
############################################################## ##############################################################
; camera /usr/etc/motion/camera1.conf
# Remember: If you have more than one camera you must have one ; camera /usr/etc/motion/camera2.conf
# camera file for each camera. E.g. 2 cameras requires 3 files: ; camera /usr/etc/motion/camera3.conf
# This motion.conf file AND camera1.conf and camera2.conf. ; camera /usr/etc/motion/camera4.conf
# Only put the options that are unique to each camera in the
# camera config files.
; camera /etc/motion/camera1.conf
; camera /etc/motion/camera2.conf
; camera /etc/motion/camera3.conf
; camera /etc/motion/camera4.conf
############################################################## ##############################################################
# Camera config directory - One for each camera. # Directory to read '.conf' files for cameras.
############################################################## ##############################################################
# ; camera_dir /usr/etc/motion/conf.d
; camera_dir /etc/motion/conf.d

View File

@ -1,770 +1,174 @@
# Rename this distribution example file to motion.conf # Rename this distribution example file to motion.conf
# #
# This config file was generated by motion 4.0.1 # This config file was generated by motion 4.3.2
# Documentation: /usr/share/doc/motion/motion_guide.html
#
# This file contains only the basic configuration options to get a
# system working. There are many more options available. Please
# consult the documentation for the complete list of all options.
#
############################################################ ############################################################
# Daemon # System control configuration parameters
############################################################ ############################################################
# Start in daemon (background) mode and release terminal (default: off) # Start in daemon (background) mode and release terminal.
daemon on daemon off
# File to store the process ID, also called pid file. (default: not defined) # Start in Setup-Mode, daemon disabled.
process_id_file /var/run/motion/motion.pid
############################################################
# Basic Setup Mode
############################################################
# Start in Setup-Mode, daemon disabled. (default: off)
setup_mode off setup_mode off
# File to store the process ID.
; pid_file value
# Use a file to save logs messages, if not defined stderr and syslog is used. (default: not defined) # File to write logs messages into. If not defined stderr and syslog is used.
;logfile /tmp/motion.log log_file /var/log/motion/motion.log
# Level of log messages [1..9] (EMG, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL). (default: 6 / NTC) # Level of log messages [1..9] (EMG, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL).
log_level 6 log_level 6
# Filter to log messages by type (COR, STR, ENC, NET, DBL, EVT, TRK, VID, ALL). (default: ALL) # Target directory for pictures, snapshots and movies
log_type all target_dir /var/lib/motion
########################################################### # Video device (e.g. /dev/video0) to be used for capturing.
# Capture device options
############################################################
# Videodevice to be used for capturing (default /dev/video0)
# for FreeBSD default is /dev/bktr0
videodevice /dev/video0 videodevice /dev/video0
# v4l2_palette allows one to choose preferable palette to be use by motion # Parameters to control video device. See motion_guide.html
# to capture from those supported by your videodevice. (default: 17) ; vid_control_params value
# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and
# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG.
# Setting v4l2_palette to 2 forces motion to use V4L2_PIX_FMT_SBGGR8
# instead.
#
# Values :
# V4L2_PIX_FMT_SN9C10X : 0 'S910'
# V4L2_PIX_FMT_SBGGR16 : 1 'BYR2'
# V4L2_PIX_FMT_SBGGR8 : 2 'BA81'
# V4L2_PIX_FMT_SPCA561 : 3 'S561'
# V4L2_PIX_FMT_SGBRG8 : 4 'GBRG'
# V4L2_PIX_FMT_SGRBG8 : 5 'GRBG'
# V4L2_PIX_FMT_PAC207 : 6 'P207'
# V4L2_PIX_FMT_PJPG : 7 'PJPG'
# V4L2_PIX_FMT_MJPEG : 8 'MJPEG'
# V4L2_PIX_FMT_JPEG : 9 'JPEG'
# V4L2_PIX_FMT_RGB24 : 10 'RGB3'
# V4L2_PIX_FMT_SPCA501 : 11 'S501'
# V4L2_PIX_FMT_SPCA505 : 12 'S505'
# V4L2_PIX_FMT_SPCA508 : 13 'S508'
# V4L2_PIX_FMT_UYVY : 14 'UYVY'
# V4L2_PIX_FMT_YUYV : 15 'YUYV'
# V4L2_PIX_FMT_YUV422P : 16 '422P'
# V4L2_PIX_FMT_YUV420 : 17 'YU12'
#
v4l2_palette 17
# Tuner device to be used for capturing using tuner as source (default /dev/tuner0) # The full URL of the network camera stream.
# This is ONLY used for FreeBSD. Leave it commented out for Linux ; netcam_url value
; tunerdevice /dev/tuner0
# The video input to be used (default: -1) # Name of mmal camera (e.g. vc.ril.camera for pi camera).
# Should normally be set to 0 or 1 for video/TV cards, and -1 for USB cameras ; mmalcam_name value
# Set to 0 for uvideo(4) on OpenBSD
input -1
# The video norm to use (only for video capture and TV tuner cards) # Camera control parameters (see raspivid/raspistill tool documentation)
# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL) ; mmalcam_control_params value
norm 0
# The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0) ############################################################
frequency 0 # Image Processing configuration parameters
############################################################
# Override the power line frequency for the webcam. (normally not necessary) # Image width in pixels.
# Values:
# -1 : Do not modify device setting
# 0 : Power line frequency Disabled
# 1 : 50hz
# 2 : 60hz
# 3 : Auto
power_line_frequency -1
# Rotate image this number of degrees. The rotation affects all saved images as
# well as movies. Valid values: 0 (default = no rotation), 90, 180 and 270.
rotate 0
# Image width (pixels). Valid range: Camera dependent, default: 352
width 640 width 640
# Image height (pixels). Valid range: Camera dependent, default: 288 # Image height in pixels.
height 480 height 480
# Maximum number of frames to be captured per second. # Maximum number of frames to be captured per second.
# Valid range: 2-100. Default: 100 (almost no limit). framerate 15
framerate 100
# Minimum time in seconds between capturing picture frames from the camera. # Rotate to fit
# Default: 0 = disabled - the capture rate is given by the camera framerate. rotate 90
# This option is used when you want to capture images at a rate lower than 2 per second.
minimum_frame_time 0
# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// mjpg:// rtsp:// mjpeg:// or file:///) # Text to be overlayed in the lower left corner of images
# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. A trailing slash may be required for some cameras. text_left GETH-HUB-3
# Default: Not defined
; netcam_url value
# Username and password for network camera (only if required). Default: not defined # Text to be overlayed in the lower right corner of images.
# Syntax is user:password
; netcam_userpass value
# The setting for keep-alive of network socket, should improve performance on compatible net cameras.
# off: The historical implementation using HTTP/1.0, closing the socket after each http request.
# force: Use HTTP/1.0 requests with keep alive header to reuse the same connection.
# on: Use HTTP/1.1 requests that support keep alive as default.
# Default: off
netcam_keepalive off
# URL to use for a netcam proxy server, if required, e.g. "http://myproxy".
# If a port number other than 80 is needed, use "http://myproxy:1234".
# Default: not defined
; netcam_proxy value
# Set less strict jpeg checks for network cameras with a poor/buggy firmware.
# Default: off
netcam_tolerant_check off
# RTSP connection uses TCP to communicate to the camera. Can prevent image corruption.
# Default: on
rtsp_uses_tcp on
# Name of camera to use if you are using a camera accessed through OpenMax/MMAL
# Default: Not defined
; mmalcam_name vc.ril.camera
# Camera control parameters (see raspivid/raspistill tool documentation)
# Default: Not defined
; mmalcam_control_params -hf
# Let motion regulate the brightness of a video device (default: off).
# The auto_brightness feature uses the brightness option as its target value.
# If brightness is zero auto_brightness will adjust to average brightness value 128.
# Only recommended for cameras without auto brightness
auto_brightness off
# Set the initial brightness of a video device.
# If auto_brightness is enabled, this value defines the average brightness level
# which Motion will try and adjust to.
# Valid range 0-255, default 0 = disabled
brightness 0
# Set the contrast of a video device.
# Valid range 0-255, default 0 = disabled
contrast 0
# Set the saturation of a video device.
# Valid range 0-255, default 0 = disabled
saturation 0
# Set the hue of a video device (NTSC feature).
# Valid range 0-255, default 0 = disabled
hue 0
############################################################
# Round Robin (multiple inputs on same video device name)
############################################################
# Number of frames to capture in each roundrobin step (default: 1)
roundrobin_frames 1
# Number of frames to skip before each roundrobin step (default: 1)
roundrobin_skip 1
# Try to filter out noise generated by roundrobin (default: off)
switchfilter off
############################################################
# Motion Detection Settings:
############################################################
# Threshold for number of changed pixels in an image that
# triggers motion detection (default: 1500)
threshold 1500
# Automatically tune the threshold down if possible (default: off)
threshold_tune off
# Noise threshold for the motion detection (default: 32)
noise_level 32
# Automatically tune the noise threshold (default: on)
noise_tune on
# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined)
# Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid.
# (l)abeling must only be used once and the 'l' must be the last letter.
# Comment out to disable
despeckle_filter EedDl
# Detect motion in predefined areas (1 - 9). Areas are numbered like that: 1 2 3
# A script (on_area_detected) is started immediately when motion is 4 5 6
# detected in one of the given areas, but only once during an event. 7 8 9
# One or more areas can be specified with this option. Take care: This option
# does NOT restrict detection to these areas! (Default: not defined)
; area_detect value
# PGM file to use as a sensitivity mask.
# Full path name to. (Default: not defined)
; mask_file value
# Dynamically create a mask file during operation (default: 0)
# Adjust speed of mask changes from 0 (off) to 10 (fast)
smart_mask_speed 0
# Ignore sudden massive light intensity changes given as a percentage of the picture
# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled
lightswitch 0
# Picture frames must contain motion at least the specified number of frames
# in a row before they are detected as true motion. At the default of 1, all
# motion is detected. Valid range: 1 to thousands, recommended 1-5
minimum_motion_frames 1
# Specifies the number of pre-captured (buffered) pictures from before motion
# was detected that will be output at motion detection.
# Recommended range: 0 to 5 (default: 0)
# Do not use large values! Large values will cause Motion to skip video frames and
# cause unsmooth movies. To smooth movies use larger values of post_capture instead.
pre_capture 0
# Number of frames to capture after motion is no longer detected (default: 0)
post_capture 0
# Event Gap is the seconds of no motion detection that triggers the end of an event.
# An event is defined as a series of motion images taken within a short timeframe.
# Recommended value is 60 seconds (Default). The value -1 is allowed and disables
# events causing all Motion to be written to one single movie file and no pre_capture.
# If set to 0, motion is running in gapless mode. Movies don't have gaps anymore. An
# event ends right after no more motion is detected and post_capture is over.
event_gap 60
# Maximum length in seconds of a movie
# When value is exceeded a new movie file is created. (Default: 0 = infinite)
max_movie_time 0
# Always save images even if there was no motion (default: off)
emulate_motion off
############################################################
# Image File Output
############################################################
# Output 'normal' pictures when motion is detected (default: on)
# Valid values: on, off, first, best, center
# When set to 'first', only the first picture of an event is saved.
# Picture with most motion of an event is saved when set to 'best'.
# Picture with motion nearest center of picture is saved when set to 'center'.
# Can be used as preview shot for the corresponding movie.
output_pictures off
# Output pictures with only the pixels moving object (ghost images) (default: off)
output_debug_pictures off
# The quality (in percent) to be used by the jpeg compression (default: 75)
quality 75
# Type of output images
# Valid values: jpeg, ppm (default: jpeg)
picture_type jpeg
############################################################
# FFMPEG related options
# Film (movies) file output, and deinterlacing of the video input
# The options movie_filename and timelapse_filename are also used
# by the ffmpeg feature
############################################################
# Use ffmpeg to encode movies in realtime (default: off)
ffmpeg_output_movies off
# Use ffmpeg to make movies with only the pixels moving
# object (ghost images) (default: off)
ffmpeg_output_debug_movies off
# Use ffmpeg to encode a timelapse movie
# Default value 0 = off - else save frame every Nth second
ffmpeg_timelapse 0
# The file rollover mode of the timelapse video
# Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual
ffmpeg_timelapse_mode daily
# Bitrate to be used by the ffmpeg encoder (default: 400000)
# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled)
ffmpeg_bps 400000
# Enables and defines variable bitrate for the ffmpeg encoder.
# ffmpeg_bps is ignored if variable bitrate is enabled.
# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps,
# or the range 1 - 100 where 1 means worst quality and 100 is best.
ffmpeg_variable_bitrate 0
# Codec to used by ffmpeg for the video compression.
# Timelapse videos have two options.
# mpg - Creates mpg file with mpeg-2 encoding.
# If motion is shutdown and restarted, new pics will be appended
# to any previously created file with name indicated for timelapse.
# mpeg4 - Creates avi file with the default encoding.
# If motion is shutdown and restarted, new pics will create a
# new file with the name indicated for timelapse.
# Supported formats are:
# mpeg4 or msmpeg4 - gives you files with extension .avi
# msmpeg4 is recommended for use with Windows Media Player because
# it requires no installation of codec on the Windows client.
# swf - gives you a flash film with extension .swf
# flv - gives you a flash video with extension .flv
# ffv1 - FF video codec 1 for Lossless Encoding
# mov - QuickTime
# mp4 - MPEG-4 Part 14 H264 encoding
# mkv - Matroska H264 encoding
# hevc - H.265 / HEVC (High Efficiency Video Coding)
ffmpeg_video_codec mpeg4
# When creating videos, should frames be duplicated in order
# to keep up with the requested frames per second
# (default: true)
ffmpeg_duplicate_frames true
############################################################
# SDL Window
############################################################
# Number of motion thread to show in SDL Window (default: 0 = disabled)
#sdl_threadnr 0
############################################################
# External pipe to video encoder
# Replacement for FFMPEG builtin encoder for ffmpeg_output_movies only.
# The options movie_filename and timelapse_filename are also used
# by the ffmpeg feature
#############################################################
# Bool to enable or disable extpipe (default: off)
use_extpipe off
# External program (full path and opts) to pipe raw video to
# Generally, use '-' for STDIN...
;extpipe mencoder -demuxer rawvideo -rawvideo w=%w:h=%h:i420 -ovc x264 -x264encopts bframes=4:frameref=1:subq=1:scenecut=-1:nob_adapt:threads=1:keyint=1000:8x8dct:vbv_bufsize=4000:crf=24:partitions=i8x8,i4x4:vbv_maxrate=800:no-chroma-me -vf denoise3d=16:12:48:4,pp=lb -of avi -o %f.avi - -fps %fps
;extpipe x264 - --input-res %wx%h --fps %fps --bitrate 2000 --preset ultrafast --quiet -o %f.mp4
;extpipe mencoder -demuxer rawvideo -rawvideo w=%w:h=%h:fps=%fps -ovc x264 -x264encopts preset=ultrafast -of lavf -o %f.mp4 - -fps %fps
;extpipe ffmpeg -y -f rawvideo -pix_fmt yuv420p -video_size %wx%h -framerate %fps -i pipe:0 -vcodec libx264 -preset ultrafast -f mp4 %f.mp4
############################################################
# Snapshots (Traditional Periodic Webcam File Output)
############################################################
# Make automated snapshot every N seconds (default: 0 = disabled)
snapshot_interval 0
############################################################
# Text Display
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second, %T = HH:MM:SS,
# %v = event, %q = frame number, %t = camera id number,
# %D = changed pixels, %N = noise level, \n = new line,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event - do not use with text_event!
# You can put quotation marks around the text to allow
# leading spaces
############################################################
# Locate and draw a box around the moving object.
# Valid values: on, off, preview (default: off)
# Set to 'preview' will only draw a box in preview_shot pictures.
locate_motion_mode off
# Set the look and style of the locate box if enabled.
# Valid values: box, redbox, cross, redcross (default: box)
# Set to 'box' will draw the traditional box.
# Set to 'redbox' will draw a red box.
# Set to 'cross' will draw a little cross to mark center.
# Set to 'redcross' will draw a little red cross to mark center.
locate_motion_style box
# Draws the timestamp using same options as C function strftime(3)
# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock
# Text is placed in lower right corner
text_right %Y-%m-%d\n%T-%q text_right %Y-%m-%d\n%T-%q
# Draw a user defined text on the images using same options as C function strftime(3)
# Default: Not defined = no text
# Text is placed in lower left corner
; text_left GETH-HUB-2 %t
# Draw the number of changed pixed on the images (default: off)
# Will normally be set to off except when you setup and adjust the motion settings
# Text is placed in upper right corner
text_changes off
# This option defines the value of the special event conversion specifier %C
# You can use any conversion specifier in this option except %C. Date and time
# values are from the timestamp of the first image in the current event.
# Default: %Y%m%d%H%M%S
# The idea is that %C can be used filenames and text_left/right for creating
# a unique identifier for each event.
text_event %Y%m%d%H%M%S
# Draw characters at twice normal size on images. (default: off)
text_double off
# Text to include in a JPEG EXIF comment
# May be any text, including conversion specifiers.
# The EXIF timestamp is included independent of this text.
;exif_text %i%J/%K%L
############################################################ ############################################################
# Target Directories and filenames For Images And Films # Motion detection configuration parameters
# For the options snapshot_, picture_, movie_ and timelapse_filename
# you can use conversion specifiers
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = camera id number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# Quotation marks round string are allowed.
############################################################ ############################################################
# Target base directory for pictures and films # Always save pictures and movies even if there was no motion.
# Recommended to use absolute path. (Default: current working directory) emulate_motion off
target_dir /var/run/motion/capture
# File path for snapshots (jpeg or ppm) relative to target_dir # Threshold for number of changed pixels that triggers motion.
# Default: %v-%Y%m%d%H%M%S-snapshot threshold 1500
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot
# File extension .jpg or .ppm is automatically added so do not include this.
# Note: A symbolic link called lastsnap.jpg created in the target_dir will always
# point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap'
snapshot_filename %v-%Y%m%d%H%M%S-snapshot
# File path for motion triggered images (jpeg or ppm) relative to target_dir # Noise threshold for the motion detection.
# Default: %v-%Y%m%d%H%M%S-%q ; noise_level 32
# Default value is equivalent to legacy oldlayout option
# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q
# File extension .jpg or .ppm is automatically added so do not include this
# Set to 'preview' together with best-preview feature enables special naming
# convention for preview shots. See motion guide for details
picture_filename %v-%Y%m%d%H%M%S-%q
# File path for motion triggered ffmpeg films (movies) relative to target_dir # Despeckle the image using (E/e)rode or (D/d)ilate or (l)abel.
# Default: %v-%Y%m%d%H%M%S despeckle_filter EedDl
# File extensions(.mpg .avi) are automatically added so do not include them
movie_filename %v-%Y%m%d%H%M%S
# File path for timelapse movies relative to target_dir # Number of images that must contain motion to trigger an event.
# Default: %Y%m%d-timelapse minimum_motion_frames 1
# File extensions(.mpg .avi) are automatically added so do not include them
timelapse_filename %Y%m%d-timelapse # Gap in seconds of no motion detected that triggers the end of an event.
event_gap 60
# The number of pre-captured (buffered) pictures from before motion.
pre_capture 3
# Number of frames to capture after motion is no longer detected.
post_capture 0
############################################################ ############################################################
# Global Network Options # Script execution configuration parameters
############################################################
# Enable IPv6 (default: off)
ipv6_enabled off
############################################################
# Live Stream Server
############################################################ ############################################################
# The mini-http server listens to this port for requests (default: 0 = disabled) # Command to be executed when an event starts.
stream_port 8081
# Quality of the jpeg (in percent) images produced (default: 50)
stream_quality 50
# Output frames at 1 fps when no motion is detected and increase to the
# rate given by stream_maxrate when motion is detected (default: off)
stream_motion off
# Maximum framerate for stream streams (default: 1)
stream_maxrate 1
# Restrict stream connections to localhost only (default: on)
stream_localhost off
# Limits the number of images per connection (default: 0 = unlimited)
# Number can be defined by multiplying actual stream rate by desired number of seconds
# Actual stream rate is the smallest of the numbers framerate and stream_maxrate
stream_limit 0
# Set the authentication method (default: 0)
# 0 = disabled
# 1 = Basic authentication
# 2 = MD5 digest (the safer authentication)
stream_auth_method 0
# Authentication for the stream. Syntax username:password
# Default: not defined (Disabled)
; stream_authentication username:password
# Percentage to scale the stream image for preview
# Default: 25
; stream_preview_scale 25
# Have stream preview image start on a new line
# Default: no
; stream_preview_newline no
############################################################
# HTTP Based Control
############################################################
# TCP/IP port for the http server to listen on (default: 0 = disabled)
webcontrol_port 8080
# Restrict control connections to localhost only (default: on)
webcontrol_localhost on
# Output for http server, select off to choose raw text plain (default: on)
webcontrol_html_output on
# Authentication for the http based control. Syntax username:password
# Default: not defined (Disabled)
; webcontrol_authentication username:password
############################################################
# Tracking (Pan/Tilt)
#############################################################
# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo, 6=servo)
# The generic type enables the definition of motion center and motion size to
# be used with the conversion specifiers for options like on_motion_detected
track_type 0
# Enable auto tracking (default: off)
track_auto off
# Serial port of motor (default: none)
;track_port /dev/ttyS0
# Motor number for x-axis (default: 0)
;track_motorx 0
# Set motorx reverse (default: 0)
;track_motorx_reverse 0
# Motor number for y-axis (default: 0)
;track_motory 1
# Set motory reverse (default: 0)
;track_motory_reverse 0
# Maximum value on x-axis (default: 0)
;track_maxx 200
# Minimum value on x-axis (default: 0)
;track_minx 50
# Maximum value on y-axis (default: 0)
;track_maxy 200
# Minimum value on y-axis (default: 0)
;track_miny 50
# Center value on x-axis (default: 0)
;track_homex 128
# Center value on y-axis (default: 0)
;track_homey 128
# ID of an iomojo camera if used (default: 0)
track_iomojo_id 0
# Angle in degrees the camera moves per step on the X-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_x 10
# Angle in degrees the camera moves per step on the Y-axis
# with auto-track (default: 10)
# Currently only used with pwc type cameras
track_step_angle_y 10
# Delay to wait for after tracking movement as number
# of picture frames (default: 10)
track_move_wait 10
# Speed to set the motor to (stepper motor option) (default: 255)
track_speed 255
# Number of steps to make (stepper motor option) (default: 40)
track_stepsize 40
############################################################
# External Commands, Warnings and Logging:
# You can use conversion specifiers for the on_xxxx commands
# %Y = year, %m = month, %d = date,
# %H = hour, %M = minute, %S = second,
# %v = event, %q = frame number, %t = camera id number,
# %D = changed pixels, %N = noise level,
# %i and %J = width and height of motion area,
# %K and %L = X and Y coordinates of motion center
# %C = value defined by text_event
# %f = filename with full path
# %n = number indicating filetype
# Both %f and %n are only defined for on_picture_save,
# on_movie_start and on_movie_end
# Quotation marks round string are allowed.
############################################################
# Do not sound beeps when detecting motion (default: on)
# Note: Motion never beeps when running in daemon mode.
quiet on
# Command to be executed when an event starts. (default: none)
# An event starts at first motion detected after a period of no motion defined by event_gap
; on_event_start value ; on_event_start value
# Command to be executed when an event ends after a period of no motion # Command to be executed when an event ends.
# (default: none). The period of no motion is defined by option event_gap.
; on_event_end value ; on_event_end value
# Command to be executed when a picture (.ppm|.jpg) is saved (default: none) # Command to be executed when a movie file is closed.
# To give the filename as an argument to a command append it with %f
; on_picture_save value
# Command to be executed when a motion frame is detected (default: none)
; on_motion_detected value
# Command to be executed when motion in a predefined area is detected
# Check option 'area_detect'. (default: none)
; on_area_detected value
# Command to be executed when a movie file (.mpg|.avi) is created. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_start value
# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none)
# To give the filename as an argument to a command append it with %f
; on_movie_end value ; on_movie_end value
# Command to be executed when a camera can't be opened or if it is lost
# NOTE: There is situations when motion don't detect a lost camera!
# It depends on the driver, some drivers dosn't detect a lost camera at all
# Some hangs the motion thread. Some even hangs the PC! (default: none)
; on_camera_lost value
#####################################################################
# Common Options for database features.
# Options require database options to be active also.
#####################################################################
# Log to the database when creating motion triggered picture file (default: on)
; sql_log_picture on
# Log to the database when creating a snapshot image file (default: on)
; sql_log_snapshot on
# Log to the database when creating motion triggered movie file (default: off)
; sql_log_movie off
# Log to the database when creating timelapse movies file (default: off)
; sql_log_timelapse off
# SQL query string that is sent to the database
# Use same conversion specifiers has for text features
# Additional special conversion specifiers are
# %n = the number representing the file_type
# %f = filename with full path
# Default value:
# Create tables :
##
# Mysql
# CREATE TABLE security (camera int, filename char(80) not null, frame int, file_type int, time_stamp timestamp(14), event_time_stamp timestamp(14));
#
# Postgresql
# CREATE TABLE security (camera int, filename char(80) not null, frame int, file_type int, time_stamp timestamp without time zone, event_time_stamp timestamp without time zone);
#
# insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
; sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C')
############################################################ ############################################################
# Database Options # Picture output configuration parameters
############################################################ ############################################################
# database type : mysql, postgresql, sqlite3 (default : not defined) # Output pictures when motion is detected
; database_type value picture_output off
# database to log to (default: not defined)
# for sqlite3, the full path and name for the database.
; database_dbname value
# The host on which the database is located (default: localhost)
; database_host value
# User account name for database (default: not defined)
; database_user value
# User password for database (default: not defined)
; database_password value
# Port on which the database is located
# mysql 3306 , postgresql 5432 (default: not defined)
; database_port value
# Database wait time in milliseconds for locked database to
# be unlocked before returning database locked error (default 0)
; database_busy_timeout 0
# File name(without extension) for pictures relative to target directory
picture_filename %Y%m%d%H%M%S-%q
############################################################ ############################################################
# Video Loopback Device (vloopback project) # Movie output configuration parameters
############################################################ ############################################################
# Output images to a video4linux loopback device # Create movies of motion events.
# The value '-' means next available (default: not defined) movie_output on
; video_pipe value
# Output motion images to a video4linux loopback device # Maximum length of movie in seconds.
# The value '-' means next available (default: not defined) movie_max_time 60
; motion_video_pipe value
# The encoding quality of the movie. (0=use bitrate. 1=worst quality, 100=best)
movie_quality 45
# Container/Codec to used for the movie. See motion_guide.html
movie_codec mkv
# File name(without extension) for movies relative to target directory
movie_filename %t-%v-%Y%m%d%H%M%S
############################################################
# Webcontrol configuration parameters
############################################################
# Port number used for the webcontrol.
webcontrol_port 8080
# Restrict webcontrol connections to the localhost.
webcontrol_localhost on
# Type of configuration options to allow via the webcontrol.
webcontrol_parms 0
############################################################
# Live stream configuration parameters
############################################################
# The port number for the live stream.
stream_port 8081
# Restrict stream connections to the localhost.
stream_localhost off
############################################################## ##############################################################
# camera config files - One for each camera. # Camera config files - One for each camera.
# Except if only one camera - You only need this config file.
# If you have more than one camera you MUST define one camera
# config file for each camera in addition to this config file.
############################################################## ##############################################################
; camera /usr/etc/motion/camera1.conf
# Remember: If you have more than one camera you must have one ; camera /usr/etc/motion/camera2.conf
# camera file for each camera. E.g. 2 cameras requires 3 files: ; camera /usr/etc/motion/camera3.conf
# This motion.conf file AND camera1.conf and camera2.conf. ; camera /usr/etc/motion/camera4.conf
# Only put the options that are unique to each camera in the
# camera config files.
; camera /etc/motion/camera1.conf
; camera /etc/motion/camera2.conf
; camera /etc/motion/camera3.conf
; camera /etc/motion/camera4.conf
############################################################## ##############################################################
# Camera config directory - One for each camera. # Directory to read '.conf' files for cameras.
############################################################## ##############################################################
# ; camera_dir /usr/etc/motion/conf.d
; camera_dir /etc/motion/conf.d

View File

@ -20,8 +20,8 @@
- name: Copy the motion config - name: Copy the motion config
become: yes become: yes
register: motion_config register: motion_config
copy: template:
src: "motion.conf/{{ inventory_hostname }}" src: "motion.conf.j2"
dest: "/etc/motion/motion.conf" dest: "/etc/motion/motion.conf"
- name: Create motion log folder - name: Create motion log folder
@ -41,7 +41,7 @@
when: motion_config.changed and motion_enabled when: motion_config.changed and motion_enabled
service: service:
name: motion name: motion
state: restarted state: started
enabled: yes enabled: yes
- name: Allow override of motion service - name: Allow override of motion service
@ -64,6 +64,15 @@
block: | block: |
dtoverlay=gpio-ir,gpio_pin={{ gpio_in_pin | default('18') }} dtoverlay=gpio-ir,gpio_pin={{ gpio_in_pin | default('18') }}
dtoverlay=gpio-ir-tx,gpio_pin={{ gpio_out_pin | default('17') }} dtoverlay=gpio-ir-tx,gpio_pin={{ gpio_out_pin | default('17') }}
start_x=1
- name: Unset camera autodetect
become: yes
register: camera_autodetect
lineinfile:
path: "/boot/config.txt"
regexp: "camera_auto_detect"
line: "# camera_auto_detect=1"
- name: Set the dtparam - name: Set the dtparam
become: yes become: yes
@ -89,7 +98,7 @@
- name: Reboot if needed - name: Reboot if needed
become: yes become: yes
when: modules_config.changed or dtparam.changed or dtoverlay.changed or modules_config_2.changed when: modules_config.changed or dtparam.changed or dtoverlay.changed or modules_config_2.changed or camera_autodetect.changed
reboot: reboot:
- name: Wait if needed - name: Wait if needed
@ -101,15 +110,18 @@
register: lircd_supp_config register: lircd_supp_config
become: yes become: yes
copy: copy:
src: "hardware.conf" src: "{{ item }}"
dest: "/etc/lirc/hardware.conf" dest: "/etc/lirc/{{ item }}"
loop:
- hardware.conf
- lirc_options.conf
- name: Copy lircd remote config - name: Copy lircd remote config
register: lircd_remote_config register: lircd_remote_config
become: yes become: yes
copy: copy:
src: "lircd.conf/{{ inventory_hostname }}" src: "lircd.conf/{{ inventory_hostname }}"
dest: /etc/lircd.conf dest: /etc/lirc/lircd.conf
- name: Start the services - name: Start the services
when: lircd_supp_config.changed or lircd_remote_config.changed when: lircd_supp_config.changed or lircd_remote_config.changed

View File

@ -3,8 +3,8 @@
# This file contains the names of kernel modules that should be loaded # This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored. # at boot time, one per line. Lines beginning with "#" are ignored.
lirc_dev # lirc_dev
lirc_rpi gpio_in_pin={{ gpio_in_pin | default('18') }} gpio_out_pin={{ gpio_out_pin | default('17') }} # lirc_rpi gpio_in_pin={{ gpio_in_pin | default('18') }} gpio_out_pin={{ gpio_out_pin | default('17') }}
bcm2835-v4l2 bcm2835-v4l2
r8188eu r8188eu

View File

@ -0,0 +1,176 @@
# Rename this distribution example file to motion.conf
#
# This config file was generated by motion 4.3.2
# Documentation: /usr/share/doc/motion/motion_guide.html
#
# This file contains only the basic configuration options to get a
# system working. There are many more options available. Please
# consult the documentation for the complete list of all options.
#
############################################################
# System control configuration parameters
############################################################
# Start in daemon (background) mode and release terminal.
daemon off
# Start in Setup-Mode, daemon disabled.
setup_mode off
# File to store the process ID.
; pid_file value
# File to write logs messages into. If not defined stderr and syslog is used.
log_file /var/log/motion/motion.log
# Level of log messages [1..9] (EMG, ALR, CRT, ERR, WRN, NTC, INF, DBG, ALL).
log_level 6
# Target directory for pictures, snapshots and movies
target_dir /var/lib/motion
# Video device (e.g. /dev/video0) to be used for capturing.
videodevice /dev/video0
# Parameters to control video device. See motion_guide.html
; vid_control_params value
# The full URL of the network camera stream.
; netcam_url value
# Name of mmal camera (e.g. vc.ril.camera for pi camera).
; mmalcam_name value
mmalcam_name vc.ril.camera
mmalcam_use_still off
# Camera control parameters (see raspivid/raspistill tool documentation)
; mmalcam_control_params value
############################################################
# Image Processing configuration parameters
############################################################
# Image width in pixels.
width 1296
# Image height in pixels.
height 972
# Maximum number of frames to be captured per second.
framerate 15
# Rotate to fit
rotate {{ rotate }}
# Text to be overlayed in the lower left corner of images
text_left {{ inventory_hostname }}
# Text to be overlayed in the lower right corner of images.
text_right %Y-%m-%d\n%T-%q
############################################################
# Motion detection configuration parameters
############################################################
# Always save pictures and movies even if there was no motion.
emulate_motion off
# Threshold for number of changed pixels that triggers motion.
threshold 1500
# Noise threshold for the motion detection.
; noise_level 32
# Despeckle the image using (E/e)rode or (D/d)ilate or (l)abel.
despeckle_filter EedDl
# Number of images that must contain motion to trigger an event.
minimum_motion_frames 1
# Gap in seconds of no motion detected that triggers the end of an event.
event_gap 60
# The number of pre-captured (buffered) pictures from before motion.
pre_capture 3
# Number of frames to capture after motion is no longer detected.
post_capture 0
############################################################
# Script execution configuration parameters
############################################################
# Command to be executed when an event starts.
; on_event_start value
# Command to be executed when an event ends.
; on_event_end value
# Command to be executed when a movie file is closed.
; on_movie_end value
############################################################
# Picture output configuration parameters
############################################################
# Output pictures when motion is detected
picture_output off
# File name(without extension) for pictures relative to target directory
picture_filename %Y%m%d%H%M%S-%q
############################################################
# Movie output configuration parameters
############################################################
# Create movies of motion events.
movie_output off
# Maximum length of movie in seconds.
movie_max_time 60
# The encoding quality of the movie. (0=use bitrate. 1=worst quality, 100=best)
movie_quality 45
# Container/Codec to used for the movie. See motion_guide.html
movie_codec mkv
# File name(without extension) for movies relative to target directory
movie_filename %t-%v-%Y%m%d%H%M%S
############################################################
# Webcontrol configuration parameters
############################################################
# Port number used for the webcontrol.
webcontrol_port 8080
# Restrict webcontrol connections to the localhost.
webcontrol_localhost on
# Type of configuration options to allow via the webcontrol.
webcontrol_parms 0
############################################################
# Live stream configuration parameters
############################################################
# The port number for the live stream.
stream_port 8081
# Restrict stream connections to the localhost.
stream_localhost off
##############################################################
# Camera config files - One for each camera.
##############################################################
; camera /usr/etc/motion/camera1.conf
; camera /usr/etc/motion/camera2.conf
; camera /usr/etc/motion/camera3.conf
; camera /usr/etc/motion/camera4.conf
##############################################################
# Directory to read '.conf' files for cameras.
##############################################################
; camera_dir /usr/etc/motion/conf.d

View File

@ -5,3 +5,4 @@
name: name:
- openhab2 - openhab2
- name:

View File

@ -1,7 +0,0 @@
# Server list generated by rankmirrors on 2022-01-25
Server = http://mirrors.kernel.org/archlinux/$repo/os/$arch
Server = http://arch.hu.fo/archlinux/$repo/os/$arch
Server = http://il.us.mirror.archlinux-br.org/$repo/os/$arch
Server = http://ftp.osuosl.org/pub/archlinux/$repo/os/$arch
Server = http://mirror.pit.teraswitch.com/archlinux/$repo/os/$arch
Server = http://mirrors.gigenet.com/archlinux/$repo/os/$arch

View File

@ -9,14 +9,21 @@
- name: Static ArchLinux network config - name: Static ArchLinux network config
become: yes become: yes
when: static when: static and not tap
template: template:
src: netctl-static.j2 src: netctl-static.j2
dest: "/etc/netctl/{{ ipinterface }}" dest: "/etc/netctl/{{ ipinterface }}"
- name: Tap ArchLinux network config
become: yes
when: tap and not static
template:
src: netctl-tap.j2
dest: "/etc/netctl/{{ ipinterface }}"
- name: Dynamic ArchLinux network config - name: Dynamic ArchLinux network config
become: yes become: yes
when: static when: not static and not tap
template: template:
src: netctl-dhcp.j2 src: netctl-dhcp.j2
dest: "/etc/netctl/{{ ipinterface }}" dest: "/etc/netctl/{{ ipinterface }}"

View File

@ -19,6 +19,7 @@
- iotop - iotop
- lsof - lsof
- rsync - rsync
- xfsprogs
state: present state: present
update_cache: yes update_cache: yes
@ -107,9 +108,10 @@
become: yes become: yes
copy: copy:
content: | content: |
deb http://raspbian.raspberrypi.org/raspbian/ bullseye main contrib non-free rpi deb http://archive.raspberrypi.org/debian/ bullseye main
# deb-src http://archive.raspbian.org/raspbian/ stretch main contrib non-free rpi # Uncomment line below then 'apt-get update' to enable 'apt-get source'
dest: /etc/apt/sources.list #deb-src http://archive.raspberrypi.org/debian/ bullseye main
dest: /etc/apt/sources.list.d/raspi.list
owner: root owner: root
group: root group: root
mode: 0644 mode: 0644

View File

@ -0,0 +1,4 @@
Description='A basic static ethernet connection'
Interface={{ ipinterface }}
Connection=ethernet
IP=no

View File

@ -1,10 +0,0 @@
---
name: Sharingan IDS/IPS Packages
become: yes
package:
name:
- clamav
- suricata
- oinkmaster
- sshguard
- ossec-local

View File

@ -6,7 +6,7 @@ Nice=19
IOSchedulingClass=best-effort IOSchedulingClass=best-effort
IOSchedulingPriority=7 IOSchedulingPriority=7
Type=simple Type=simple
ExecStart=clamscan -r / -i --exclude-dir="/srv/ygddrasil" --exclude-dir="/dev" --exclude-dir="/sys" --exclude-dir="/proc" --exclude-dir="/media/Infected/" --exclude-dir="/etc/snort/rules" --exclude-dir="/etc/suricata/rules" ExecStart=-clamscan -r / -i --exclude-dir="/srv/ygddrasil" --exclude-dir="/dev" --exclude-dir="/sys" --exclude-dir="/proc" --exclude-dir="/media/Infected/" --exclude-dir="/etc/snort/rules" --exclude-dir="/etc/suricata/rules"
TimeoutSec=3600 TimeoutSec=3600
User=root User=root
Group=root Group=root

View File

@ -6,9 +6,9 @@
## usage. Each test specifies a resource, conditions and the action to be ## usage. Each test specifies a resource, conditions and the action to be
## performed should a test fail. ## performed should a test fail.
check system $HOST check system $HOST
if loadavg (1min) per core > 2 for 5 cycles then exec "/etc/monit.d/scripts/critical Load average is high" if loadavg (1min) per core > 2 for 25 times within 30 cycles then exec "/etc/monit.d/scripts/critical Load average is high"
if memory usage > 75% then exec "/etc/monit.d/scripts/critical Memory is overused." if memory usage > 75% for 8 times within 10 cycles then exec "/etc/monit.d/scripts/critical Memory is overused."
if swap usage > 25% then exec "/etc/monit.d/scripts/critical Swap is overused." if swap usage > 25% for 8 times within 10 cycles then exec "/etc/monit.d/scripts/critical Swap is overused."
group system group system
# #
## Check filesystem permissions, uid, gid, space usage, inode usage and disk I/O. ## Check filesystem permissions, uid, gid, space usage, inode usage and disk I/O.

View File

@ -1,29 +1,29 @@
check program https_aninix with path "/usr/lib/monitoring-plugins/check_http --ssl -H aninix.net" check program https_aninix with path "/usr/lib/monitoring-plugins/check_http --ssl -w 10 -c 10 -H aninix.net"
if status != 0 then exec "/etc/monit.d/scripts/critical aninix.net not reporting OK" if status != 0 for 3 times within 5 cycles then exec "/etc/monit.d/scripts/critical aninix.net not reporting OK"
check program https_foundation with path "/usr/lib/monitoring-plugins/check_http --ssl -H foundation.aninix.net" check program https_foundation with path "/usr/lib/monitoring-plugins/check_http --ssl -w 10 -c 10 -H foundation.aninix.net"
if status != 0 then exec "/etc/monit.d/scripts/critical foundation.aninix.net not reporting OK" if status != 0 for 3 times within 5 cycles then exec "/etc/monit.d/scripts/critical foundation.aninix.net not reporting OK"
check program https_geth with path "/usr/lib/monitoring-plugins/check_http --ssl -H geth.aninix.net" check program https_geth with path "/usr/lib/monitoring-plugins/check_http --ssl -w 10 -c 10 -H geth.aninix.net"
if status != 0 then exec "/etc/monit.d/scripts/critical geth.aninix.net not reporting OK" if status != 0 for 3 times within 5 cycles then exec "/etc/monit.d/scripts/critical geth.aninix.net not reporting OK"
check program https_lykos with path "/usr/lib/monitoring-plugins/check_http --ssl -H lykos.aninix.net" check program https_lykos with path "/usr/lib/monitoring-plugins/check_http --ssl -w 10 -c 10 -H lykos.aninix.net"
if status != 0 then exec "/etc/monit.d/scripts/critical lykos.aninix.net not reporting OK" if status != 0 for 3 times within 5 cycles then exec "/etc/monit.d/scripts/critical lykos.aninix.net not reporting OK"
check program https_maat with path "/usr/lib/monitoring-plugins/check_http --ssl -H maat.aninix.net -r PASS" check program https_maat with path "/usr/lib/monitoring-plugins/check_http --ssl -w 10 -c 10 -H maat.aninix.net -r PASS"
if status != 0 then exec "/etc/monit.d/scripts/critical maat.aninix.net not reporting OK" if status != 0 for 3 times within 5 cycles then exec "/etc/monit.d/scripts/critical maat.aninix.net not reporting OK"
check program https_password with path "/usr/lib/monitoring-plugins/check_http --ssl -H password.aninix.net" check program https_password with path "/usr/lib/monitoring-plugins/check_http --ssl -w 10 -c 10 -H password.aninix.net"
if status != 0 then exec "/etc/monit.d/scripts/critical password.aninix.net not reporting OK" if status != 0 for 3 times within 5 cycles then exec "/etc/monit.d/scripts/critical password.aninix.net not reporting OK"
check program https_sharingan with path "/usr/lib/monitoring-plugins/check_http --ssl -H sharingan.aninix.net" check program https_sharingan with path "/usr/lib/monitoring-plugins/check_http --ssl -w 10 -c 10 -H sharingan.aninix.net"
if status != 0 then exec "/etc/monit.d/scripts/critical sharingan.aninix.net not reporting OK" if status != 0 for 3 times within 5 cycles then exec "/etc/monit.d/scripts/critical sharingan.aninix.net not reporting OK"
check program https_singularity with path "/usr/lib/monitoring-plugins/check_http --ssl -H singularity.aninix.net" check program https_singularity with path "/usr/lib/monitoring-plugins/check_http --ssl -w 10 -c 10 -H singularity.aninix.net"
if status != 0 then exec "/etc/monit.d/scripts/critical singularity.aninix.net not reporting OK" if status != 0 for 3 times within 5 cycles then exec "/etc/monit.d/scripts/critical singularity.aninix.net not reporting OK"
check program https_wolfpack with path "/usr/lib/monitoring-plugins/check_http --ssl -H wolfpack.aninix.net" check program https_wolfpack with path "/usr/lib/monitoring-plugins/check_http --ssl -w 10 -c 10 -H wolfpack.aninix.net"
if status != 0 then exec "/etc/monit.d/scripts/critical wolfpack.aninix.net not reporting OK" if status != 0 for 3 times within 5 cycles then exec "/etc/monit.d/scripts/critical wolfpack.aninix.net not reporting OK"
#check program https_yggdrasil with path "/usr/lib/monitoring-plugins/check_http --ssl -u /web/index.html -H yggdrasil.aninix.net" #check program https_yggdrasil with path "/usr/lib/monitoring-plugins/check_http --ssl -w 10 -c 10 -u /web/index.html -H yggdrasil.aninix.net"
# if status != 0 then exec "/etc/monit.d/scripts/critical yggdrasil.aninix.net not reporting OK" # if status != 0 for 3 times within 5 cycles then exec "/etc/monit.d/scripts/critical yggdrasil.aninix.net not reporting OK"

View File

@ -1,11 +1,10 @@
[Unit] [Unit]
Description=Darebee Notifier for AniNIX Martial Arts Description=AniNIX/Sharingan | oinkmaster service
[Service] [Service]
Nice=19 Nice=19
IOSchedulingClass=best-effort IOSchedulingClass=best-effort
IOSchedulingPriority=7 IOSchedulingPriority=7
Type=simple Type=simple
ExecStart=/home/DarkFeather/bin/darebee-notifier ExecStart=/usr/bin/oinkmaster.pl -Q -o /etc/suricata/rules/
ExecStartPost=systemctl restart suricata
#EOF

View File

@ -1,5 +1,5 @@
[Unit] [Unit]
Description=Sharingan-IDS | oinkmaster timer Description=AniNIX/Sharingan | oinkmaster timer
[Timer] [Timer]
OnCalendar=05:00 OnCalendar=05:00